<div>Hi,</div><div><br /></div><div>some time ago I described my problem here https://illumos.topicbox.com/groups/developer/T634206bd4ad02a71-M13c079595752100c6a52d7a9 already.</div><div><br /></div><div>I use the atge driver on my laptop with AR8151V2 chip. There I have the problem if the cable disconnects 10 sec later I get a L1C error and as a result it seems that the upper layer assumes that the link is up with 10MB half duplex.</div><div><br /></div><div>If I use the dtrace debug output of the atge driver I see after this error no further output, so I guess the driver is gone to nirvana.</div><div><br /></div><div>My explanation of this behaviour is that atge_device_stop did not stop all ISR activity.</div><div><br /></div><div>So I like to check how is the alc driver in BSD or the alx dirver in Linux working.</div><div>But it seems there is very less similarity of the illumos driver with the BSD or Linux driver.<br /></div><div><br /></div><div>So I am wondering which source was the blue print for the Illumos atge driver?</div><div>Perhaps can Gary give me a hint?<br /></div><div><br /></div><div>Many thanks<br /></div>-- <br signature="separator" />Carsten<br />