[OpenIndiana-discuss] Marvell SATA controllers? Intel i210 GB ether
Hans J Albertsson
hans.j.albertsson at gmail.com
Sun May 31 11:33:29 UTC 2015
The FreeBSD forums had a few discussions about Marvell 9172 and 9230 SATA
chips, and while 9172 seems to work as is from FreeBSD 9.2 or so, they can
make the 9230 work after reflashing with non-raid FW.
I suppose it might be the same with solaris sw.
Hans J. Albertsson
>From my Nexus 5
Den 27 maj 2015 18:29 skrev "Gary Gendel" <gary at genashor.com>:
> I'm still using an older Marvell 8-port sata PCI controller in my Sunfire
> V20z with the latest version of hipster.
>
> pci11ab,11ab, instance #0
> Driver properties:
> name='sata' type=int items=1 dev=none
> value=00000001
> Hardware properties:
> name='scsi-binding-set' type=string items=1
> value='spi'
> name='initiator-interconnect-type' type=string items=1
> value='SPI'
> name='scsi-tag-age-limit' type=int items=1
> value=00000002
> name='scsi-selection-timeout' type=int items=1
> value=000000fa
> name='scsi-watchdog-tick' type=int items=1
> value=0000000a
> name='scsi-reset-delay' type=int items=1
> value=00000bb8
> name='scsi-options' type=int items=1
> value=00107ff8
> name='scsi-enumeration' type=int items=1
> value=00000000
> name='assigned-addresses' type=int items=10
> value=83030810.00000000.fe100000.00000000.00100000.81030818.000000$
> name='reg' type=int items=15
> value=00030800.00000000.00000000.00000000.00000000.03030810.000000$
> name='compatible' type=string items=7
> value='pci11ab,6081.11ab.11ab.9' +
> 'pci11ab,6081.11ab.11ab' + 'pci$
> name='model' type=string items=1
> value='SCSI bus controller'
> name='power-consumption' type=int items=2
> value=00000001.00000001
> name='66mhz-capable' type=boolean
> name='fast-back-to-back' type=boolean
> name='devsel-speed' type=int items=1
> value=00000001
> name='interrupts' type=int items=1
> value=00000001
> name='max-latency' type=int items=1
> value=00000000
> name='min-grant' type=int items=1
> value=00000000
> name='subsystem-vendor-id' type=int items=1
> value=000011ab
> name='subsystem-id' type=int items=1
> value=000011ab
> name='unit-address' type=string items=1
> value='1'
> name='class-code' type=int items=1
> value=00010000
> name='revision-id' type=int items=1
> value=00000009
> name='vendor-id' type=int items=1
> value=000011ab
> name='device-id' type=int items=1
> value=00006081
> name='vendor-name' type=string items=1
> value='Marvell Technology Group Ltd.'
> name='device-name' type=string items=1
> value='MV88SX6081 8-port SATA II PCI-X Controller'
> name='subsystem-name' type=string items=1
> value='unknown subsystem'
> Interrupt Specifications:
> Interrupt Priority=0x5 (ipl 5), vector=0xa (10)
> Device Minor Nodes:
> dev=(234,0)
> dev_path=/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 1:devctl
> spectype=chr type=minor
> dev=(234,1024)
> dev_path=/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 1:0
> spectype=chr type=minor
> dev_link=/dev/cfg/sata1/0
> dev=(234,1025)
> dev_path=/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 1:1
> spectype=chr type=minor
> dev_link=/dev/cfg/sata1/1
> dev=(234,1026)
> dev_path=/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 1:2
> spectype=chr type=minor
> dev_link=/dev/cfg/sata1/2
> dev=(234,1027)
> dev_path=/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 1:3
> spectype=chr type=minor
> dev_link=/dev/cfg/sata1/3
> dev=(234,1028)
> dev_path=/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 1:4
> spectype=chr type=minor
> dev_link=/dev/cfg/sata1/4
> dev=(234,1029)
> dev_path=/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 1:5
> spectype=chr type=minor
> dev_link=/dev/cfg/sata1/5
> dev=(234,1030)
> dev_path=/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 1:6
> spectype=chr type=minor
> dev_link=/dev/cfg/sata1/6
> dev=(234,1031)
> dev_path=/pci at 0,0/pci1022,7450 at b/pci11ab,11ab at 1:7
> spectype=chr type=minor
> dev_link=/dev/cfg/sata1/7
>
> On 05/27/2015 11:18 AM, Hans J Albertsson wrote:
>
>> Might.
>>
>> Hans J. Albertsson
>> From my Nexus 5
>> Den 27 maj 2015 11:14 skrev "Nikola M" <minikola at gmail.com>:
>>
>> On 05/24/15 06:27 PM, Hans J Albertsson wrote:
>>>
>>> Can oi and/or other illumos variants handle marvell sata controller
>>>> chips
>>>> these days?
>>>>
>>>> You can always run LiveDVD and see for yourself.
>>> And report back if something works or not and how.
>>>
>>> http://wiki.openindiana.org/pages/viewpage.action?pageId=4883876
>>>
>>> Specifically the SE9172 and SE9230.
>>>
>>>> Oracle Solaris at the latest sru of 11.2 claims to at least see the
>>>> drives
>>>> and probably works.
>>>>
>>>> Also, can OI/illumos handle the i210 GB ethernet chips?
>>>>
>>>> This is for an asrock c2750d4i MB.
>>>>
>>>> Hans J. Albertsson
>>>> From my Nexus 5
>>>> _______________________________________________
>>>> openindiana-discuss mailing list
>>>> openindiana-discuss at openindiana.org
>>>> http://openindiana.org/mailman/listinfo/openindiana-discuss
>>>>
>>>>
>>> _______________________________________________
>>> openindiana-discuss mailing list
>>> openindiana-discuss at openindiana.org
>>> http://openindiana.org/mailman/listinfo/openindiana-discuss
>>>
>>> _______________________________________________
>> openindiana-discuss mailing list
>> openindiana-discuss at openindiana.org
>> http://openindiana.org/mailman/listinfo/openindiana-discuss
>>
>
>
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>
More information about the openindiana-discuss
mailing list