[OpenIndiana-discuss] Problem changing specific QLogic 2462 port to qlt (COMStar)

[Cyril Plisko]

On Fri, Oct 1, 2010 at 2:28 PM, Steeve Roy <sroy at coveo.com> wrote:

>
> 1.       # luxadm -e port
> /devices/pci at 16,0/pci10de,378 at d/pci1077,138 at 0/fp at 0,0:devctl        CONNECTED  - Need to change this one to qlt
> /devices/pci at 16,0/pci10de,378 at d/pci1077,138 at 0,1/fp at 0,0:devctl      CONNECTED
> /devices/pci at 16,0/pci10de,377 at f/pci1077,138 at 0/fp at 0,0:devctl        CONNECTED  - Need to change this one to qlt
> /devices/pci at 16,0/pci10de,377 at f/pci1077,138 at 0,1/fp at 0,0:devctl      CONNECTED
>
> 2. 1st path: update_drv -a -i "/pci at 16,0/pci10de,378 at d/pci1077,138 at 0/fp at 0,0" qlt
>
> 3. 2nd path: update_drv -a -i "/pci at 16,0/pci10de,377 at f/pci1077,138 at 0/fp at 0,0" qlt

Hi Steeve,


Drop "/fp at 0,0" suffix from the command line above. I think there is a
typo in documentation.


-- 
Regards,
        Cyril