[OpenIndiana-discuss] exporting rpool with system running

[Mark]

On 06/08/2011 1:34 a.m., Harry Putnam wrote:
> Reginald Beardsley<pulaskite at yahoo.com>  writes:
>
> [ reordered by ed -hp]
>
>> --- On Mon, 8/1/11, Harry Putnam<reader at newsguy.com>  wrote:
>>
>> From: Harry Putnam<reader at newsguy.com>
>> Subject: Re: [OpenIndiana-discuss] exporting rpool with system running
>> To: openindiana-discuss at openindiana.org
>> Date: Monday, August 1, 2011, 7:14 AM
>>
>> Roy Sigurd Karlsbakk<roy at karlsbakk.net>  writes:
>>
>>> AFAIK, exporting an rpool while running on it, is quite
>>> impossible. Why would you want to export it?
>
>
>> Detach the mirror disk from the old rpool.
>
> Does this need to be done before migrating the disks to the new setup?
>
> That is, should I run the old hardware... do `zpool detach ...'  on the boot
> discs (the other zpools are already exported) and then shutdown and
> migrate the discs?
>
>
I haven't done this step in the past with my set of testing disks.
With Sata, it always seems to boot successfully, but if mirrored, not 
usually with the mirror disk intact, so that does need to be added back.

Mark.





>
>
> _______________________________________________
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss