[OpenIndiana-discuss] OpenIndiana (or others) and Dell E6320 - Sandybridge

Mon Aug 22 10:31:09 UTC 2011

Thomas,

FWIW, there should be a device detection/identification tool (or
similar - haven't used it in a while) on the live CD that creates a
report about all the devices it finds and what it thinks about them
(ie are there drivers ...). IIRC, there is (was?) also a version that
can run Windows that you can download somewhere from the Oracle pages.

HTH
Michael

On Mon, Aug 22, 2011 at 12:22, Tomas Bodzar <tomas.bodzar at gmail.com> wrote:
> Hi all,
>
> I was trying oi-148 and oi-151 Live CD/DVD and was running fine on my
> laptop except of 4 things (I will post identification from OpenBSD for
> obvious reasons). Point number one is probably biggest issue (number
> two not so much, 3 don't sure and 4 I can live with that as it's
> simply just too much new HW). Do you know if there are some plans or
> progress in support of new Sandybridge devices? Will be there official
> oi-151 soon or some higher version (can't see info in Wiki about that?
>
> Thanks a lot
>
> 1) LAN card is not detected/doesn't have driver
>
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> xx:xx:xx:xx:xx:xx
> $ sudo pcidump -v 0:25:0
>  0:25:0: Intel 82579LM
>        0x0000: Vendor ID: 8086 Product ID: 1502
>        0x0004: Command: 0007 Status ID: 0010
>        0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 04
>        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
>        0x0010: BAR mem 32bit addr: 0xe2e00000/0x00020000
>        0x0014: BAR mem 32bit addr: 0xe2e80000/0x00001000
>        0x0018: BAR io addr: 0x00004080/0x0020
>        0x001c: BAR empty (00000000)
>        0x0020: BAR empty (00000000)
>        0x0024: BAR empty (00000000)
>        0x0028: Cardbus CIS: 00000000
>        0x002c: Subsystem Vendor ID: 1028 Product ID: 0492
>        0x0030: Expansion ROM Base Address: 00000000
>        0x0038: 00000000
>        0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00
>        0x00c8: Capability 0x01: Power Management
>        0x00d0: Capability 0x05: Message Signaled Interrupts (MSI)
>        0x00e0: Capability 0x13: PCI Advanced Features
> $
>
> 2) WiFi (which is not working in OpenBSD either - it's not in DB of
> devices yet, in fact it's 6205 card)
>
> iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6005" rev
> 0x34: msi, MIMO 2T2R, MoW, address XX:XX:XX:XX:XX:XX
> $ sudo pcidump -v 2:0:0
>  2:0:0: Intel Centrino Advanced-N 6005
>        0x0000: Vendor ID: 8086 Product ID: 0082
>        0x0004: Command: 0006 Status ID: 0010
>        0x0008: Class: 02 Subclass: 80 Interface: 00 Revision: 34
>        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
>        0x0010: BAR mem 64bit addr: 0x00000000e2d00000/0x00002000
>        0x0018: BAR empty (00000000)
>        0x001c: BAR empty (00000000)
>        0x0020: BAR empty (00000000)
>        0x0024: BAR empty (00000000)
>        0x0028: Cardbus CIS: 00000000
>        0x002c: Subsystem Vendor ID: 8086 Product ID: 1321
>        0x0030: Expansion ROM Base Address: 00000000
>        0x0038: 00000000
>        0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
>        0x00c8: Capability 0x01: Power Management
>        0x00d0: Capability 0x05: Message Signaled Interrupts (MSI)
>        0x00e0: Capability 0x10: PCI Express
>                Link Speed: 2.5 / 2.5 Gb/s Link Width: x1 / x1
> $
>
> 3) One of the parts (not sure if MEI or KT) was without driver
> $ sudo pcidump
> Domain /dev/pci0:
>  0:0:0: Intel Core 2G Host
>  0:2:0: Intel GT2+ Video
>  0:22:0: Intel 6 Series MEI
>  0:22:3: Intel 6 Series KT
>  0:25:0: Intel 82579LM
>  0:26:0: Intel 6 Series USB
>  0:27:0: Intel 6 Series HD Audio
>  0:28:0: Intel 6 Series PCIE
>  0:28:1: Intel 6 Series PCIE
>  0:28:2: Intel 6 Series PCIE
>  0:28:3: Intel 6 Series PCIE
>  0:28:5: Intel 6 Series PCIE
>  0:29:0: Intel 6 Series USB
>  0:31:0: Intel QM67 LPC
>  0:31:2: Intel 6 Series AHCI
>  0:31:3: Intel 6 Series SMBus
>  2:0:0: Intel Centrino Advanced-N 6005
>  10:0:0: O2 Micro unknown
> $
>
> 4) Only VESA driver for video card. Anyway around 200fps in OI and
> around 7fps in OpenBSD
>
> $ dmesg | grep -i vga
> vga1 at pci0 dev 2 function 0 "Intel GT2+ Video" rev 0x09
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> intagp at vga1 not configured
> $
> $ sudo pcidump -v 0:2:0
>  0:2:0: Intel GT2+ Video
>        0x0000: Vendor ID: 8086 Product ID: 0126
>        0x0004: Command: 0007 Status ID: 0090
>        0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 09
>        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
>        0x0010: BAR mem 64bit addr: 0x00000000e1400000/0x00400000
>        0x0018: BAR mem prefetchable 64bit addr: 0x00000000d0000000/0x10000000
>        0x0020: BAR io addr: 0x00004000/0x0040
>        0x0024: BAR empty (00000000)
>        0x0028: Cardbus CIS: 00000000
>        0x002c: Subsystem Vendor ID: 1028 Product ID: 0492
>        0x0030: Expansion ROM Base Address: 00000000
>        0x0038: 00000000
>        0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
>        0x0090: Capability 0x05: Message Signaled Interrupts (MSI)
>        0x00d0: Capability 0x01: Power Management
>        0x00a4: Capability 0x13: PCI Advanced Features
> $
>
> _______________________________________________
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>

-- 
Michael Schuster
http://recursiveramblings.wordpress.com/