[OpenIndiana-discuss] Missing Intel NIC Driver on OpenIndianaoi_148

[Okky Hendriansyah]

Hi Gary,

Yes, as a matter of fact I tried it again just after finishing the sys-unconfig session. And it successfully added, but failed to attach. When I tried to reboot (since some of the forums that I found mentioned rebooting) the system failed to display login screen and kept rebooting with a split second error messages. I'm reinstalling OpenIndiana again right now.

Best regards,
Okky Hendriansyah

-----Original Message-----
From: Gary Driggs <gdriggs at gmail.com>
Date: Tue, 1 Feb 2011 05:35:38 
To: Discussion list for OpenIndiana<openindiana-discuss at openindiana.org>
Reply-To: Discussion list for OpenIndiana <openindiana-discuss at openindiana.org>
Subject: Re: [OpenIndiana-discuss] Missing Intel NIC Driver on OpenIndiana
	oi_148

Have you tried running: update_drv -a -i "pci8086,2001" e1000g

On Feb 1, 2011, at 4:47 AM, Hendriansyah <mawcikurl at gmail.com> wrote:

> Hi All,
> 
> I've done the sys-unconfig, but the ones that was detected was only the old
> D-Link fast ethernet PCI card as the primary network interface. These are
> the output of the unknown ethernet controller shown in Device Driver
> Utility:
> 
> Driver URL:
> node name:                          pci8086,2001
> Vendor:                             Intel Corporation
> binding name:                       pci8086,2001
> devfs path:                         /pci at 0,0/pci8086,2001
> pci path:                           0,19,0
> compatible name:
> (pci8086,1503.8086.2001.4)(pci8086,1503.8086.2001)(pci8086,2001)(pci8086,1503.4)(pci8086,1503)(pciclass,020000)(pciclass,0200)
> driver name:                        unknown
> acpi-namespace:                     _SB_.PCI0.GBE_
> assigned-addresses:                 8200c810
> reg:                                c800
> compatible:                         pci8086,1503.8086.2001.4
> model:                              Ethernet controller
> power-consumption:                  1
> devsel-speed:                       0
> interrupts:                         1
> max-latency:                        0
> min-grant:                          0
> subsystem-vendor-id:                8086
> subsystem-id:                       2001
> unit-address:                       19
> class-code:                         20000
> revision-id:                        4
> vendor-id:                          8086
> device-id:                          1503
> 
> What other alternatives that I have as a workaround?
>>> 
_______________________________________________
OpenIndiana-discuss mailing list
OpenIndiana-discuss at openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss