[OpenIndiana-discuss] Zpool upgrade didn't seem to upgrade

[Michelle Knight]

Extra Info..

When i started the export/import, this is what came up in the messages ...

Jan 20 06:30:47 jaguar unix: [ID 954099 kern.info] NOTICE: IRQ18 is being 
shared by drivers with different interrupt levels.
Jan 20 06:30:47 jaguar This may result in reduced system performance.
Jan 20 06:31:22 jaguar scsi: [ID 107833 kern.warning] WARNING: 
/pci at 0,0/pci8086,244e at 1e/pci-ide at 2/ide at 0 (ata2):
Jan 20 06:31:22 jaguar  timeout: abort request, target=0 lun=0
Jan 20 06:31:22 jaguar scsi: [ID 107833 kern.warning] WARNING: 
/pci at 0,0/pci8086,244e at 1e/pci-ide at 2/ide at 0 (ata2):
Jan 20 06:31:22 jaguar  timeout: abort device, target=0 lun=0
Jan 20 06:31:22 jaguar scsi: [ID 107833 kern.warning] WARNING: 
/pci at 0,0/pci8086,244e at 1e/pci-ide at 2/ide at 0 (ata2):
Jan 20 06:31:22 jaguar  timeout: reset target, target=0 lun=0
Jan 20 06:31:22 jaguar scsi: [ID 107833 kern.warning] WARNING: 
/pci at 0,0/pci8086,244e at 1e/pci-ide at 2/ide at 0 (ata2):
Jan 20 06:31:22 jaguar  timeout: reset bus, target=0 lun=0
Jan 20 06:31:57 jaguar genunix: [ID 601478 kern.notice] ata_command: select 
failed DRDY 0x0 CMD 0x91 F 0x0 N 0x3f  S 0x0 H 0xf CL 0x0 CH 0x0
Jan 20 06:31:57 jaguar genunix: [ID 134136 kern.notice] ata_init_dev_parms: 
failed
Jan 20 06:31:57 jaguar gda: [ID 107833 kern.warning] WARNING: 
/pci at 0,0/pci8086,244e at 1e/pci-ide at 2/ide at 0/cmdk at 0,0 (Disk1):
Jan 20 06:31:57 jaguar  Error for command 'read sector' Error Level: 
Informational
Jan 20 06:31:57 jaguar gda: [ID 107833 kern.notice]     Sense Key: aborted 
command
Jan 20 06:31:57 jaguar gda: [ID 107833 kern.notice]     Vendor 'Gen-ATA ' 
error code: 0x3
Jan 20 06:32:02 jaguar genunix: [ID 698548 kern.notice] ata_disk_start: select 
failed
Jan 20 06:32:32 jaguar last message repeated 6 times
Jan 20 06:32:32 jaguar scsi: [ID 107833 kern.warning] WARNING: 
/pci at 0,0/pci8086,244e at 1e/pci-ide at 2/ide at 0 (ata2):

... the block from section from 6:31:57 jsut repeats and repeats. But the 
zpool status reports everything OK and not even any checksum errors.