[OpenIndiana-discuss] zpool and nfs
ann kok
oiyankok at yahoo.ca
Thu Jan 20 15:34:58 UTC 2011
Hi Bernd
SMI is selected now. But "zpool add" is still in problem. The /var/adm/message is showing nothing!
Any idea? Thank you
root at opensolaris:~# format -e
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c8t0d0 <DEFAULT cyl 2607 alt 2 hd 255 sec 63>
/pci at 0,0/pci15ad,1976 at 10/sd at 0,0
1. c8t1d0 <DEFAULT cyl 1303 alt 2 hd 255 sec 63>
/pci at 0,0/pci15ad,1976 at 10/sd at 1,0
2. c8t2d0 <DEFAULT cyl 1534 alt 2 hd 128 sec 32>
/pci at 0,0/pci15ad,1976 at 10/sd at 2,0
Specify disk (enter its number): 2
selecting c8t2d0
[disk formatted]
No Solaris fdisk partition found.
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
scsi - independent SCSI mode selects
cache - enable, disable or query SCSI disk cache
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> fdisk
No fdisk table exists. The default partition for the disk is:
a 100% "SOLARIS System" partition
Type "y" to accept the default partition, otherwise type "n" to edit the
partition table.
y
format> label
[0] SMI Label
[1] EFI Label
Specify Label type[0]: 0
Ready to label disk, continue?
Ready to label disk, continue? y
format> quit
root at opensolaris:~# zpool add rpool c8t2d0
cannot label 'c8t2d0': EFI labeled devices are not supported on root pools.
root at opensolaris:~# tail /var/adm/messages
Jan 20 09:07:58 opensolaris pseudo: [ID 129642 kern.info] pseudo-device: winlock0
Jan 20 09:07:58 opensolaris genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock at 0
Jan 20 09:07:58 opensolaris pseudo: [ID 129642 kern.info] pseudo-device: pm0
Jan 20 09:07:58 opensolaris genunix: [ID 936769 kern.info] pm0 is /pseudo/pm at 0
Jan 20 09:07:59 opensolaris pseudo: [ID 129642 kern.info] pseudo-device: nsmb0
Jan 20 09:07:59 opensolaris genunix: [ID 936769 kern.info] nsmb0 is /pseudo/nsmb at 0
Jan 20 09:07:59 opensolaris pseudo: [ID 129642 kern.info] pseudo-device: lx_systrace0
Jan 20 09:07:59 opensolaris genunix: [ID 936769 kern.info] lx_systrace0 is /pseudo/lx_systrace at 0
Jan 20 09:17:48 opensolaris mDNSResponder: [ID 702911 daemon.error] ERROR: getOptRdata - unknown opt 4
Jan 20 09:18:16 opensolaris last message repeated 5 times
Thank you
--- On Thu, 1/20/11, Bernd Helber <bernd at helber-it-services.com> wrote:
> From: Bernd Helber <bernd at helber-it-services.com>
> Subject: Re: [OpenIndiana-discuss] zpool and nfs
> To: openindiana-discuss at openindiana.org
> Received: Thursday, January 20, 2011, 10:13 AM
> Sorry i forgot,
>
> you're on x86
>
> format>fdisk
>
> y
>
> label
> select SMI Label
>
> thanks in advance.
>
>
>
> Am 20.01.11 15:22, schrieb ann kok:
> > Hi Bernd
> >
> > The label won't work and I also provide
> /var/adm/message
> >
> > Thank you
> >
> > root at opensolaris:~# format -e
> > Searching for disks...done
> >
> >
> > AVAILABLE DISK SELECTIONS:
> > 0. c8t0d0 <DEFAULT cyl
> 2607 alt 2 hd 255 sec 63>
> >
> /pci at 0,0/pci15ad,1976 at 10/sd at 0,0
> > 1. c8t1d0 <DEFAULT cyl
> 1303 alt 2 hd 255 sec 63>
> >
> /pci at 0,0/pci15ad,1976 at 10/sd at 1,0
> > 2. c8t2d0 <DEFAULT cyl
> 1534 alt 2 hd 128 sec 32>
> >
> /pci at 0,0/pci15ad,1976 at 10/sd at 2,0
> > Specify disk (enter its number): 2
> > selecting c8t2d0
> > [disk formatted]
> > No Solaris fdisk partition found.
> >
> >
> > FORMAT MENU:
> > disk
> - select a disk
> > type
> - select (define) a disk type
> > partition
> - select (define) a partition table
> > current
> - describe the current disk
> > format
> - format and analyze the disk
> > fdisk
> - run the fdisk program
> > repair
> - repair a defective sector
> > label
> - write label to the disk
> > analyze
> - surface analysis
> > defect
> - defect list management
> > backup
> - search for backup labels
> > verify
> - read and display labels
> > save
> - save new disk/partition
> definitions
> > inquiry
> - show vendor, product and revision
> > scsi
> - independent SCSI mode selects
> > cache
> - enable, disable or query SCSI disk cache
> > volname
> - set 8-character volume name
> >
> !<cmd> -
> execute <cmd>, then return
> > quit
> > format> label
> > WARNING - This disk may be in use by an application
> that has
> > modified
> the fdisk table. Ensure that this disk is
> > not
> currently in use before proceeding to use fdisk.
> >
> > /var/adm/message
> >
> > Jan 20 09:07:58 opensolaris pseudo: [ID 129642
> kern.info] pseudo-device: pm0
> > Jan 20 09:07:58 opensolaris genunix: [ID 936769
> kern.info] pm0 is /pseudo/pm at 0
> > Jan 20 09:07:59 opensolaris pseudo: [ID 129642
> kern.info] pseudo-device: nsmb0
> > Jan 20 09:07:59 opensolaris genunix: [ID 936769
> kern.info] nsmb0 is /pseudo/nsmb at 0
> > Jan 20 09:07:59 opensolaris pseudo: [ID 129642
> kern.info] pseudo-device: lx_systrace0
> > Jan 20 09:07:59 opensolaris genunix: [ID 936769
> kern.info] lx_systrace0 is /pseudo/lx_systrace at 0
> > Jan 20 09:17:48 opensolaris mDNSResponder: [ID 702911
> daemon.error] ERROR: getOptRdata - unknown opt 4
> > Jan 20 09:18:16 opensolaris last message repeated 5
> times
> >
> >
> >
> >
> > --- On Wed, 1/19/11, Bernd Helber <bernd at helber-it-services.com>
> wrote:
> >
> >> From: Bernd Helber <bernd at helber-it-services.com>
> >> Subject: Re: [OpenIndiana-discuss] zpool and nfs
> >> To: "Discussion list for OpenIndiana" <openindiana-discuss at openindiana.org>
> >> Received: Wednesday, January 19, 2011, 5:37 PM
> >> format
> >> label --> select SMI Label.
> >>
> >> that should solve the issue,
> >>
> >> if there are more issues, please provide
> >>
> >> /var/adm/messages*
> >>
> >> thanks in advance.
> >>
> >>
> >> Am 19.01.11 22:53, schrieb ann kok:
> >>> Hi Edward
> >>>
> >>> Thank you for your mail
> >>>
> >>> I follow your advice to reboot my computer. It
> is
> >> fine
> >>>
> >>> Now. I have problem to attach it. What can I
> do this?
> >>>
> >>> root at opensolaris:~# format -e
> >>> Searching for disks...done
> >>>
> >>>
> >>> AVAILABLE DISK SELECTIONS:
> >>> 0.
> c8t0d0 <DEFAULT cyl
> >> 2607 alt 2 hd 255 sec 63>
> >>>
> >> /pci at 0,0/pci15ad,1976 at 10/sd at 0,0
> >>> 1.
> c8t1d0 <DEFAULT cyl
> >> 1303 alt 2 hd 255 sec 63>
> >>>
> >> /pci at 0,0/pci15ad,1976 at 10/sd at 1,0
> >>> Specify disk (enter its number): ^C
> >>> root at opensolaris:~# zpool add rpool c8t1d0
> >>> cannot label 'c8t1d0': EFI labeled devices are
> not
> >> supported on root pools.
> >>>
> >>> 2/ For the command devfsadm -Cv, I run it the
> first
> >> time. It showed many message but I can't catch it.
>
> >>> I try to run again, but show nothing
> >>> How can I catch those message?
> >>>
> >>> Thank you so much
> >>>
> >>>
> >>> --- On Wed, 1/19/11, Edward Ned Harvey <openindiana at nedharvey.com>
> >> wrote:
> >>>
> >>>> From: Edward Ned Harvey <openindiana at nedharvey.com>
> >>>> Subject: Re: [OpenIndiana-discuss] zpool
> and nfs
> >>>> To: "Discussion list for OpenIndiana"
> <openindiana-discuss at openindiana.org>
> >>>> Received: Wednesday, January 19, 2011,
> 4:23 PM
> >>>>> From: ann kok [mailto:oiyankok at yahoo.ca]
> >>>>>
> >>>>> As I haven't received the response, I
> run the
> >> formart
> >>>> -e
> >>>>> It said it needs around 3 hours
> >>>>>
> >>>>> format> format
> >>>>> Ready to format. Formatting
> cannot be
> >>>> interrupted
> >>>>> and takes 232 minutes (estimated).
> Continue?
> >>>>> Continue? y
> >>>>
> >>>> Oh my goodness. No.
> >>>> When you run format -e, it should just
> display a
> >> list of
> >>>> all the disks in
> >>>> the system (instantly), and ask you which
> one you
> >> want to
> >>>> work on, and then
> >>>> you quit. I'm sure I said
> that. Quit
> >> without
> >>>> changing anything. (And be
> >>>> careful not to break anything.) I
> am
> >> extremely
> >>>> certain I never told you to
> >>>> type "format" after you got into the
> format
> >> prompt.
> >>>> And when it prompted
> >>>> you "Continue?" You should
> definitely have
> >> said "n"
> >>>> instead of "y"
> >>>>
> >>>> You have entered the format prompt, and
> then
> >> entered the
> >>>> format command on
> >>>> the format prompt, which apparently does
> >> something
> >>>> horrific. Hopefully
> >>>> you're doing it to a disk you don't care
> about.
> >>>>
> >>>> I suggest rebooting first, just to ensure
> you
> >> haven't
> >>>> destroyed your system.
> >>>> You may have destroyed it.
> >>>>
> >>>> Here is an example:
> >>>> [root at FILER ~]# format
> -e
> >>>> Searching for
> >> disks...done
> >>>>
> >>>>
> >>>> AVAILABLE DISK
> >> SELECTIONS:
> >>>>
> 0. c0d0
> >>>> <ST325082-
> >>>>
> 5QE4X6G-0001-232.83GB>
> >>>>
>
> >>>>
> /pci at 0,0/pci15ad,7a0 at 15/pci-ide at 0/ide at 0/cmdk at 0,0
> >>>>
> 1.
> >>>> c2t0d0 <DEFAULT cyl 3913 alt 2 hd 255
> sec
> >> 63>
> >>>>
>
> >>>> /pci at 0,0/pci15ad,1976 at 10/sd at 0,0
> >>>>
> 2.
> >>>> c2t1d0 <VMware-Virtual
> disk-1.0-200.00GB>
> >>>>
>
> >>>> /pci at 0,0/pci15ad,1976 at 10/sd at 1,0
> >>>>
> 3.
> >>>> c2t2d0 <VMware-Virtual
> disk-1.0-170.00GB>
> >>>>
>
> >>>> /pci at 0,0/pci15ad,1976 at 10/sd at 2,0
> >>>> Specify disk (enter
> its
> >> number): ^C
> >>>>
> >>>> I'm sure I said this too. Don't
> bother
> >> formatting any
> >>>> disks. Just use
> >>>> zpool add. End of story. It
> will use
> >> the whole
> >>>> device, and it's an instant
> >>>> operation.
> >>>>
> >>>>
> >>>>> 4/ What is the different betwen zpool
> attach
> >> zpool and
> >>>> zpool add
> >>>>
> >>>> Zpool attach will create a mirror of a
> device
> >> which was not
> >>>> previously
> >>>> mirrored.
> >>>> Zpool add will add storage to a
> pool. If you
> >> add a
> >>>> single device, then it's
> >>>> not redundant. If you add a mirror
> or a
> >> raidz, then
> >>>> it's redundant.
> >>>>
> >>>>
> >>>>
> _______________________________________________
> >>>> OpenIndiana-discuss mailing list
> >>>> OpenIndiana-discuss at openindiana.org
> >>>> http://openindiana.org/mailman/listinfo/openindiana-discuss
> >>>>
> >>>
> >>>
> >>>
> >>>
> _______________________________________________
> >>> OpenIndiana-discuss mailing list
> >>> OpenIndiana-discuss at openindiana.org
> >>> http://openindiana.org/mailman/listinfo/openindiana-discuss
> >>
> >>
> >> --
> >> with kind regards
> >>
> >>
> >> _.-|-/\-._
> >>
> \-'
> >> '-.
> >>
> /
> >> /\ /\ \/
> >> \/
> <
> >> . > ./. \/
> >> _ / <
> >> > /___\ |.
> >> .< \ / <
> /\
> >> > ( #) |#)
> >> | |
> <
> >>
> /\ -. __\
> >> \ <
> >> < V >
> )./_._(\
> >> .)/\ <
> >> < .- /
> \_'_) )-..
> >> \
> >> < ./ / > >
> >> /._./
> >>
> >> /\ < '-'
> >>> > /
> >> '-._ < v
> >> > _.-'
> >> /
> >> '-.______.·' \
> >>
> >> \/
> >>
> >>
> >>
> ***********************************************************
> >> *This message has been scanned by DrWeb AV
> and
> >> Spamassassin
> >>
> >> _______________________________________________
> >> OpenIndiana-discuss mailing list
> >> OpenIndiana-discuss at openindiana.org
> >> http://openindiana.org/mailman/listinfo/openindiana-discuss
> >>
> >
> >
> >
> > _______________________________________________
> > OpenIndiana-discuss mailing list
> > OpenIndiana-discuss at openindiana.org
> > http://openindiana.org/mailman/listinfo/openindiana-discuss
>
>
> --
> with kind regards
>
> Bernd Helber
>
> phone +49 7331 81982
> mobile +49 177 7494439
>
> Filsstraße 20
> 73329
> Kuchen Fils
>
> mailto:bernd at helber-it-services.com
> http://helber-it-services.com
>
>
> _.-|-/\-._
> \-'
> '-.
> /
> /\ /\ \/
> \/ <
> . > ./. \/
> _ / <
> > /___\ |.
> .< \ / < /\
> > ( #) |#)
> | | <
> /\ -. __\
> \ <
> < V > )./_._(\
> .)/\ <
> < .- / \_'_) )-..
> \
> < ./ / > >
> /._./
>
> /\ < '-'
> > > /
> '-._ < v
> > _.-'
> /
> '-.______.·' \
>
> \/
>
>
> ***********************************************************
> *This message has been scanned by DrWeb AV and
> Spamassassin
>
> _______________________________________________
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>
More information about the OpenIndiana-discuss
mailing list