[OpenIndiana-discuss] zpool and nfs
Bernd Helber
bernd at helber-it-services.com
Thu Jan 20 15:58:20 UTC 2011
Try to fix the Label again...
then try
zpool add -n the Box should give you a response.
also have a look at the man page
man zpool
you could also try to force it with
zpool add -f
But please keep in mind not every device could be forced. ;)
please have also a look at blogs.sun.com its a very useful ressource.
Also the Solarisinternals Wiki.
Cheers
Am 20.01.11 16:34, schrieb ann kok:
> Hi Bernd
>
> SMI is selected now. But "zpool add" is still in problem. The /var/adm/message is showing nothing!
>
> Any idea? Thank you
>
> root at opensolaris:~# format -e
> Searching for disks...done
>
>
> AVAILABLE DISK SELECTIONS:
> 0. c8t0d0 <DEFAULT cyl 2607 alt 2 hd 255 sec 63>
> /pci at 0,0/pci15ad,1976 at 10/sd at 0,0
> 1. c8t1d0 <DEFAULT cyl 1303 alt 2 hd 255 sec 63>
> /pci at 0,0/pci15ad,1976 at 10/sd at 1,0
> 2. c8t2d0 <DEFAULT cyl 1534 alt 2 hd 128 sec 32>
> /pci at 0,0/pci15ad,1976 at 10/sd at 2,0
> Specify disk (enter its number): 2
> selecting c8t2d0
> [disk formatted]
> No Solaris fdisk partition found.
>
>
> FORMAT MENU:
> disk - select a disk
> type - select (define) a disk type
> partition - select (define) a partition table
> current - describe the current disk
> format - format and analyze the disk
> fdisk - run the fdisk program
> repair - repair a defective sector
> label - write label to the disk
> analyze - surface analysis
> defect - defect list management
> backup - search for backup labels
> verify - read and display labels
> save - save new disk/partition definitions
> inquiry - show vendor, product and revision
> scsi - independent SCSI mode selects
> cache - enable, disable or query SCSI disk cache
> volname - set 8-character volume name
> !<cmd> - execute <cmd>, then return
> quit
> format> fdisk
> No fdisk table exists. The default partition for the disk is:
>
> a 100% "SOLARIS System" partition
>
> Type "y" to accept the default partition, otherwise type "n" to edit the
> partition table.
> y
> format> label
> [0] SMI Label
> [1] EFI Label
> Specify Label type[0]: 0
> Ready to label disk, continue?
> Ready to label disk, continue? y
>
> format> quit
> root at opensolaris:~# zpool add rpool c8t2d0
> cannot label 'c8t2d0': EFI labeled devices are not supported on root pools.
>
> root at opensolaris:~# tail /var/adm/messages
> Jan 20 09:07:58 opensolaris pseudo: [ID 129642 kern.info] pseudo-device: winlock0
> Jan 20 09:07:58 opensolaris genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock at 0
> Jan 20 09:07:58 opensolaris pseudo: [ID 129642 kern.info] pseudo-device: pm0
> Jan 20 09:07:58 opensolaris genunix: [ID 936769 kern.info] pm0 is /pseudo/pm at 0
> Jan 20 09:07:59 opensolaris pseudo: [ID 129642 kern.info] pseudo-device: nsmb0
> Jan 20 09:07:59 opensolaris genunix: [ID 936769 kern.info] nsmb0 is /pseudo/nsmb at 0
> Jan 20 09:07:59 opensolaris pseudo: [ID 129642 kern.info] pseudo-device: lx_systrace0
> Jan 20 09:07:59 opensolaris genunix: [ID 936769 kern.info] lx_systrace0 is /pseudo/lx_systrace at 0
> Jan 20 09:17:48 opensolaris mDNSResponder: [ID 702911 daemon.error] ERROR: getOptRdata - unknown opt 4
> Jan 20 09:18:16 opensolaris last message repeated 5 times
>
> Thank you
>
> --- On Thu, 1/20/11, Bernd Helber <bernd at helber-it-services.com> wrote:
>
>> From: Bernd Helber <bernd at helber-it-services.com>
>> Subject: Re: [OpenIndiana-discuss] zpool and nfs
>> To: openindiana-discuss at openindiana.org
>> Received: Thursday, January 20, 2011, 10:13 AM
>> Sorry i forgot,
>>
>> you're on x86
>>
>> format>fdisk
>>
>> y
>>
>> label
>> select SMI Label
>>
>> thanks in advance.
>>
>>
>>
>> Am 20.01.11 15:22, schrieb ann kok:
>>> Hi Bernd
>>>
>>> The label won't work and I also provide
>> /var/adm/message
>>>
>>> Thank you
>>>
>>> root at opensolaris:~# format -e
>>> Searching for disks...done
>>>
>>>
>>> AVAILABLE DISK SELECTIONS:
>>> 0. c8t0d0 <DEFAULT cyl
>> 2607 alt 2 hd 255 sec 63>
>>>
>> /pci at 0,0/pci15ad,1976 at 10/sd at 0,0
>>> 1. c8t1d0 <DEFAULT cyl
>> 1303 alt 2 hd 255 sec 63>
>>>
>> /pci at 0,0/pci15ad,1976 at 10/sd at 1,0
>>> 2. c8t2d0 <DEFAULT cyl
>> 1534 alt 2 hd 128 sec 32>
>>>
>> /pci at 0,0/pci15ad,1976 at 10/sd at 2,0
>>> Specify disk (enter its number): 2
>>> selecting c8t2d0
>>> [disk formatted]
>>> No Solaris fdisk partition found.
>>>
>>>
>>> FORMAT MENU:
>>> disk
>> - select a disk
>>> type
>> - select (define) a disk type
>>> partition
>> - select (define) a partition table
>>> current
>> - describe the current disk
>>> format
>> - format and analyze the disk
>>> fdisk
>> - run the fdisk program
>>> repair
>> - repair a defective sector
>>> label
>> - write label to the disk
>>> analyze
>> - surface analysis
>>> defect
>> - defect list management
>>> backup
>> - search for backup labels
>>> verify
>> - read and display labels
>>> save
>> - save new disk/partition
>> definitions
>>> inquiry
>> - show vendor, product and revision
>>> scsi
>> - independent SCSI mode selects
>>> cache
>> - enable, disable or query SCSI disk cache
>>> volname
>> - set 8-character volume name
>>>
>> !<cmd> -
>> execute <cmd>, then return
>>> quit
>>> format> label
>>> WARNING - This disk may be in use by an application
>> that has
>>> modified
>> the fdisk table. Ensure that this disk is
>>> not
>> currently in use before proceeding to use fdisk.
>>>
>>> /var/adm/message
>>>
>>> Jan 20 09:07:58 opensolaris pseudo: [ID 129642
>> kern.info] pseudo-device: pm0
>>> Jan 20 09:07:58 opensolaris genunix: [ID 936769
>> kern.info] pm0 is /pseudo/pm at 0
>>> Jan 20 09:07:59 opensolaris pseudo: [ID 129642
>> kern.info] pseudo-device: nsmb0
>>> Jan 20 09:07:59 opensolaris genunix: [ID 936769
>> kern.info] nsmb0 is /pseudo/nsmb at 0
>>> Jan 20 09:07:59 opensolaris pseudo: [ID 129642
>> kern.info] pseudo-device: lx_systrace0
>>> Jan 20 09:07:59 opensolaris genunix: [ID 936769
>> kern.info] lx_systrace0 is /pseudo/lx_systrace at 0
>>> Jan 20 09:17:48 opensolaris mDNSResponder: [ID 702911
>> daemon.error] ERROR: getOptRdata - unknown opt 4
>>> Jan 20 09:18:16 opensolaris last message repeated 5
>> times
>>>
>>>
>>>
>>>
>>> --- On Wed, 1/19/11, Bernd Helber <bernd at helber-it-services.com>
>> wrote:
>>>
>>>> From: Bernd Helber <bernd at helber-it-services.com>
>>>> Subject: Re: [OpenIndiana-discuss] zpool and nfs
>>>> To: "Discussion list for OpenIndiana" <openindiana-discuss at openindiana.org>
>>>> Received: Wednesday, January 19, 2011, 5:37 PM
>>>> format
>>>> label --> select SMI Label.
>>>>
>>>> that should solve the issue,
>>>>
>>>> if there are more issues, please provide
>>>>
>>>> /var/adm/messages*
>>>>
>>>> thanks in advance.
>>>>
>>>>
>>>> Am 19.01.11 22:53, schrieb ann kok:
>>>>> Hi Edward
>>>>>
>>>>> Thank you for your mail
>>>>>
>>>>> I follow your advice to reboot my computer. It
>> is
>>>> fine
>>>>>
>>>>> Now. I have problem to attach it. What can I
>> do this?
>>>>>
>>>>> root at opensolaris:~# format -e
>>>>> Searching for disks...done
>>>>>
>>>>>
>>>>> AVAILABLE DISK SELECTIONS:
>>>>> 0.
>> c8t0d0 <DEFAULT cyl
>>>> 2607 alt 2 hd 255 sec 63>
>>>>>
>>>> /pci at 0,0/pci15ad,1976 at 10/sd at 0,0
>>>>> 1.
>> c8t1d0 <DEFAULT cyl
>>>> 1303 alt 2 hd 255 sec 63>
>>>>>
>>>> /pci at 0,0/pci15ad,1976 at 10/sd at 1,0
>>>>> Specify disk (enter its number): ^C
>>>>> root at opensolaris:~# zpool add rpool c8t1d0
>>>>> cannot label 'c8t1d0': EFI labeled devices are
>> not
>>>> supported on root pools.
>>>>>
>>>>> 2/ For the command devfsadm -Cv, I run it the
>> first
>>>> time. It showed many message but I can't catch it.
>>
>>>>> I try to run again, but show nothing
>>>>> How can I catch those message?
>>>>>
>>>>> Thank you so much
>>>>>
>>>>>
>>>>> --- On Wed, 1/19/11, Edward Ned Harvey <openindiana at nedharvey.com>
>>>> wrote:
>>>>>
>>>>>> From: Edward Ned Harvey <openindiana at nedharvey.com>
>>>>>> Subject: Re: [OpenIndiana-discuss] zpool
>> and nfs
>>>>>> To: "Discussion list for OpenIndiana"
>> <openindiana-discuss at openindiana.org>
>>>>>> Received: Wednesday, January 19, 2011,
>> 4:23 PM
>>>>>>> From: ann kok [mailto:oiyankok at yahoo.ca]
>>>>>>>
>>>>>>> As I haven't received the response, I
>> run the
>>>> formart
>>>>>> -e
>>>>>>> It said it needs around 3 hours
>>>>>>>
>>>>>>> format> format
>>>>>>> Ready to format. Formatting
>> cannot be
>>>>>> interrupted
>>>>>>> and takes 232 minutes (estimated).
>> Continue?
>>>>>>> Continue? y
>>>>>>
>>>>>> Oh my goodness. No.
>>>>>> When you run format -e, it should just
>> display a
>>>> list of
>>>>>> all the disks in
>>>>>> the system (instantly), and ask you which
>> one you
>>>> want to
>>>>>> work on, and then
>>>>>> you quit. I'm sure I said
>> that. Quit
>>>> without
>>>>>> changing anything. (And be
>>>>>> careful not to break anything.) I
>> am
>>>> extremely
>>>>>> certain I never told you to
>>>>>> type "format" after you got into the
>> format
>>>> prompt.
>>>>>> And when it prompted
>>>>>> you "Continue?" You should
>> definitely have
>>>> said "n"
>>>>>> instead of "y"
>>>>>>
>>>>>> You have entered the format prompt, and
>> then
>>>> entered the
>>>>>> format command on
>>>>>> the format prompt, which apparently does
>>>> something
>>>>>> horrific. Hopefully
>>>>>> you're doing it to a disk you don't care
>> about.
>>>>>>
>>>>>> I suggest rebooting first, just to ensure
>> you
>>>> haven't
>>>>>> destroyed your system.
>>>>>> You may have destroyed it.
>>>>>>
>>>>>> Here is an example:
>>>>>> [root at FILER ~]# format
>> -e
>>>>>> Searching for
>>>> disks...done
>>>>>>
>>>>>>
>>>>>> AVAILABLE DISK
>>>> SELECTIONS:
>>>>>>
>> 0. c0d0
>>>>>> <ST325082-
>>>>>>
>> 5QE4X6G-0001-232.83GB>
>>>>>>
>>
>>>>>>
>> /pci at 0,0/pci15ad,7a0 at 15/pci-ide at 0/ide at 0/cmdk at 0,0
>>>>>>
>> 1.
>>>>>> c2t0d0 <DEFAULT cyl 3913 alt 2 hd 255
>> sec
>>>> 63>
>>>>>>
>>
>>>>>> /pci at 0,0/pci15ad,1976 at 10/sd at 0,0
>>>>>>
>> 2.
>>>>>> c2t1d0 <VMware-Virtual
>> disk-1.0-200.00GB>
>>>>>>
>>
>>>>>> /pci at 0,0/pci15ad,1976 at 10/sd at 1,0
>>>>>>
>> 3.
>>>>>> c2t2d0 <VMware-Virtual
>> disk-1.0-170.00GB>
>>>>>>
>>
>>>>>> /pci at 0,0/pci15ad,1976 at 10/sd at 2,0
>>>>>> Specify disk (enter
>> its
>>>> number): ^C
>>>>>>
>>>>>> I'm sure I said this too. Don't
>> bother
>>>> formatting any
>>>>>> disks. Just use
>>>>>> zpool add. End of story. It
>> will use
>>>> the whole
>>>>>> device, and it's an instant
>>>>>> operation.
>>>>>>
>>>>>>
>>>>>>> 4/ What is the different betwen zpool
>> attach
>>>> zpool and
>>>>>> zpool add
>>>>>>
>>>>>> Zpool attach will create a mirror of a
>> device
>>>> which was not
>>>>>> previously
>>>>>> mirrored.
>>>>>> Zpool add will add storage to a
>> pool. If you
>>>> add a
>>>>>> single device, then it's
>>>>>> not redundant. If you add a mirror
>> or a
>>>> raidz, then
>>>>>> it's redundant.
>>>>>>
>>>>>>
>>>>>>
>> _______________________________________________
>>>>>> OpenIndiana-discuss mailing list
>>>>>> OpenIndiana-discuss at openindiana.org
>>>>>> http://openindiana.org/mailman/listinfo/openindiana-discuss
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>> _______________________________________________
>>>>> OpenIndiana-discuss mailing list
>>>>> OpenIndiana-discuss at openindiana.org
>>>>> http://openindiana.org/mailman/listinfo/openindiana-discuss
>>>>
>>>>
>>>> --
>>>> with kind regards
>>>>
>>>>
>>>> _.-|-/\-._
>>>>
>> \-'
>>>> '-.
>>>>
>> /
>>>> /\ /\ \/
>>>> \/
>> <
>>>> . > ./. \/
>>>> _ / <
>>>> > /___\ |.
>>>> .< \ / <
>> /\
>>>> > ( #) |#)
>>>> | |
>> <
>>>>
>> /\ -. __\
>>>> \ <
>>>> < V >
>> )./_._(\
>>>> .)/\ <
>>>> < .- /
>> \_'_) )-..
>>>> \
>>>> < ./ / > >
>>>> /._./
>>>>
>>>> /\ < '-'
>>>>> > /
>>>> '-._ < v
>>>> > _.-'
>>>> /
>>>> '-.______.·' \
>>>>
>>>> \/
>>>>
>>>>
>>>>
>> ***********************************************************
>>>> *This message has been scanned by DrWeb AV
>> and
>>>> Spamassassin
>>>>
>>>> _______________________________________________
>>>> OpenIndiana-discuss mailing list
>>>> OpenIndiana-discuss at openindiana.org
>>>> http://openindiana.org/mailman/listinfo/openindiana-discuss
>>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> OpenIndiana-discuss mailing list
>>> OpenIndiana-discuss at openindiana.org
>>> http://openindiana.org/mailman/listinfo/openindiana-discuss
>>
>>
>> --
>> with kind regards
>>
>> Bernd Helber
>>
>> phone +49 7331 81982
>> mobile +49 177 7494439
>>
>> Filsstraße 20
>> 73329
>> Kuchen Fils
>>
>> mailto:bernd at helber-it-services.com
>> http://helber-it-services.com
>>
>>
>> _.-|-/\-._
>> \-'
>> '-.
>> /
>> /\ /\ \/
>> \/ <
>> . > ./. \/
>> _ / <
>> > /___\ |.
>> .< \ / < /\
>> > ( #) |#)
>> | | <
>> /\ -. __\
>> \ <
>> < V > )./_._(\
>> .)/\ <
>> < .- / \_'_) )-..
>> \
>> < ./ / > >
>> /._./
>>
>> /\ < '-'
>>> > /
>> '-._ < v
>> > _.-'
>> /
>> '-.______.·' \
>>
>> \/
>>
>>
>> ***********************************************************
>> *This message has been scanned by DrWeb AV and
>> Spamassassin
>>
>> _______________________________________________
>> OpenIndiana-discuss mailing list
>> OpenIndiana-discuss at openindiana.org
>> http://openindiana.org/mailman/listinfo/openindiana-discuss
>>
>
>
>
> _______________________________________________
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
--
with kind regards
_.-|-/\-._
\-' '-.
/ /\ /\ \/
\/ < . > ./. \/
_ / < > /___\ |.
.< \ / < /\ > ( #) |#)
| | < /\ -. __\
\ < < V > )./_._(\
.)/\ < < .- / \_'_) )-..
\ < ./ / > > /._./
/\ < '-' > > /
'-._ < v > _.-'
/ '-.______.·' \
\/
***********************************************************
*This message has been scanned by DrWeb AV and Spamassassin
More information about the OpenIndiana-discuss
mailing list