[OpenIndiana-discuss] Openindiana in VMWare and usb devices

[Michael Stapleton]

Maybe the output of:

truss -t stat,open tip /dev/cua/0

will give us something to work with.


Mike

On Mon, 2011-06-20 at 12:54 +0200, Gabriele Bulfon wrote:

> Hi, I had no trouble with usb devices on native openindiana installations.
> Now I installed openindiana inside VMWare4.1 that supports USB devices, and infact
> they work correctly with Linux guests.
> On a virtualized Openindiana, I can attach usb keys, and see them correctly.
> I then attached an USB CDC modem, that usually works instantly on native setup, just
> by running "tip /dev/cua/0" I can see it works.
> On VMWare4.1, the modem is attached, I can see the device at /dev/cua/0 exactly linked
> as it was in the native setup.
> Running tip, I receive errors though.
> Here is what appears in /var/adm/messages when the modem is attached:
> Jun 20 20:45:00 openindiana usba: [ID 912658 kern.info] USB 1.10 interface (usbif6e0,f11a.config2.0) operating at full speed (USB 1.x) on USB 1.10 root hub: modem at 0,2, usbsacm0 at bus address 2
> Jun 20 20:45:00 openindiana usba: [ID 349649 kern.info]         MultiTech Systems T9234ZBA-USB-CDC
> Jun 20 20:45:00 openindiana genunix: [ID 936769 kern.info] usbsacm0 is /pci at 0,0/pci15ad,790 at 11/pci15ad,1976 at 2/communications at 1/modem at 0,2
> The pci device then is linked to /dev/cua/0 automatically.
> Here is what tip says:
> tip: /dev/cua/0: No such device or address
> all ports busy
> Any idea?
> _______________________________________________
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss