[OpenIndiana-discuss] JMB363 Chipset support in OI_148

Sean O'Brien upinthecloudz at gmail.com
Sun May 8 09:33:40 UTC 2011


I have a pci-express card based on JMB363 chipset, because it is listed in
HCL. The card is recognized by the ahci driver.

model:  'SATA AHCI 1.0 Interface'
                power-consumption:  00000001.00000001
                devsel-speed:  00000000
                interrupts:  00000001
                subsystem-vendor-id:  0000197b
                subsystem-id:  00002363
                unit-address:  '0'
                class-code:  00010601
                revision-id:  00000002
                vendor-id:  0000197b
                device-id:  00002363
                name:  'pci197b,2363'

The device is seen by cfgadm as well, but an attempt to connect a drive or
to reset the controller results in the following in /var/adm/messages:

May  8 01:54:36 fileserv ahci: [ID 860969 kern.warning] WARNING: ahci1:
ahci_port_reset port 0 the device hardware has been initialized and the
power-up diagnostics failed
May  8 01:54:59 fileserv ahci: [ID 860969 kern.warning] WARNING: ahci1:
ahci_port_reset port 1 the device hardware has been initialized and the
power-up diagnostics failed


There are some patches posted for an old version of OpenSolaris to resolve
issues with the ahci driver and this card.
http://web.archiveorange.com/archive/v/1sSOwqLUl8mdFzhkydYU

Would it be possible to apply these patches to the kernel source for oi_148?
Any assistance or guidance on compiling this would be much appreciated.


More information about the OpenIndiana-discuss mailing list