[OpenIndiana-discuss] 3x LSI 9211-8i controllers + direct attach backplane -- appear as on controller

[Rich]

sas2ircu is a useful tool for this.

Several people have written or are writing wrappers around it to
perform this task.

- Rich

On Wed, Nov 16, 2011 at 3:57 PM, Jason J. W. Williams
<jasonjwwilliams at gmail.com> wrote:
> On Wed, Nov 16, 2011 at 1:42 PM, Rich <rercola at acm.jhu.edu> wrote:
>
>> That is indeed the expected behavior, speaking as someone with many
>> 92xx controllers in Supermicro machines with mpxio enabled. :)
>
>
> So with mpxio off, the disks now appear on separate controllers. However,
> like the cfgadm -a output, each disk appears to be on it's own controller.
> Does each SAS channel on the SFF connector show up as it's own channel
> (e.g. cX) ? Trying to figure out how to logically map the drives back to
> common controllers if that's the case. Guess I could just go off serial #.
>
> -J
> _______________________________________________
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>