[OpenIndiana-discuss] OI and chassis/jbod support?

[Dan Swartzendruber]

Okay, this may not be the most elegant solution, but...  My LSI HBA in IT
mode presents all drives, SAS or SATA with a GUID, so I hacked up the script
to remove the prtconf/sas2ircu serial number crap and just go by the guid.
Now, I am seeing:

0:01:07    c2t5000C5000D3C80FFd0       ST9500430SS  500.0G  Ready (RDY)
rpool1: stripped
0:02:00    c2t5000C50041AB0C47d0      ST1000NM0001  1000.2G  Ready (RDY)
tank: mirror-0
0:02:03    c2t500A0751033D0AA2d0    M4-CT256M4SSD2  256.1G  Ready (RDY)
tank: cache
0:02:05    c2t50014EE25C240034d0  WDC WD10EALX-009  1000.2G  Ready (RDY)
tank: mirror-1
0:02:06    c2t50014EE206CED4ECd0  WDC WD10EALX-009  1000.2G  Ready (RDY)
tank: mirror-1
0:02:09    c2t50014EE2AEDF7498d0  WDC WD6400AAKS-0  640.1G  Ready (RDY)
tank: mirror-2
0:02:10    c2t50014EE204411A53d0  WDC WD6400AAKS-0  640.1G  Ready (RDY)
tank: mirror-2
0:02:11    c2t5000C50041BD3E87d0      ST1000NM0001  1000.2G  Ready (RDY)
tank: mirror-0
Drives : 8   Total Capacity : 6.0T

which is now 100% correct, as far as I can see.  Well, aside from the typo
for rpool1 where it says 'stripped', I assume 'striped' was what was
intended?