[OpenIndiana-discuss] HDD Upgrade problem

Sun Jun 10 13:21:08 UTC 2012

BTW, can you give some more detail on the machine and its HDD
controllers? There were recently discussions on zfs-discuss
list about Dell-branded HBAs with Dell firmware bent on power
saving, which sent the WD disks in particular to slep mode
right away instead of having them work. There were published
workarounds with Solaris driver configuration, so if the
description roughly mathches - you can try and see that
list's recent archives.

2012-06-10 13:35, michelle wrote:
> Hi Folks,
>
> I'm not having much luck and if someone can help with solid suggestions
> before I start poking around, it could save me stuffing up the machine.
>
> Firstly, I think that the graphics is having a problem with my TV, so if
> someone can tell me how to stop the system from wanting to boot in to
> the GUI, that would be a real help.
>
> Second, I'm replacing 2tb drives with 3tb drives.
> I'm runnning...
>
>                        OpenIndiana Development oi_151a X86
>          Copyright 2010 Oracle and/or its affiliates. All rights reserved.
>                          Use is subject to license terms.
>                             Assembled 01 September 2011
>
> I'm reluctant to upgrade because the system doesn't seem to be listening
> to USB keyboards on the selection screen.
>
> On attaching the 3tb I get...
>
> Jun 10 10:08:07 jaguar genunix: [ID 936769 kern.info] devinfo0 is
> /pseudo/devinfo at 0
> Jun 10 10:08:07 jaguar sata: [ID 801593 kern.warning] WARNING:
> /pci at 0,0/pci1458,b005 at 1f,2:
> Jun 10 10:08:07 jaguar  SATA device detected at port 2
> Jun 10 10:08:07 jaguar sata: [ID 663010 kern.info]
> /pci at 0,0/pci1458,b005 at 1f,2 :
> Jun 10 10:08:07 jaguar sata: [ID 761595 kern.info]      SATA disk device
> at port 2
> Jun 10 10:08:07 jaguar sata: [ID 846691 kern.info]      model WDC
> WD30EZRX-00MMMB0
> Jun 10 10:08:07 jaguar sata: [ID 693010 kern.info]      firmware 80.00A80
> Jun 10 10:08:07 jaguar sata: [ID 163988 kern.info]      serial
> number      WD-WMAWZ0278326
> Jun 10 10:08:07 jaguar sata: [ID 594940 kern.info]      supported features:
> Jun 10 10:08:07 jaguar sata: [ID 981177 kern.info]       48-bit LBA,
> DMA, Native Command Queueing, SMART, SMART self-test
> Jun 10 10:08:07 jaguar sata: [ID 643337 kern.info]      SATA Gen2
> signaling speed (3.0Gbps)
> Jun 10 10:08:07 jaguar sata: [ID 349649 kern.info]      Supported queue
> depth 32
> Jun 10 10:08:07 jaguar sata: [ID 349649 kern.info]      capacity =
> 5860533168 sectors
> Jun 10 10:08:35 jaguar scsi: [ID 107833 kern.warning] WARNING:
> /pci at 0,0/pci8086,3b4a at 1c,4/pci-ide at 0/ide at 0 (ata0):
> Jun 10 10:08:35 jaguar  timeout: abort request, target=0 lun=0
> Jun 10 10:08:35 jaguar scsi: [ID 107833 kern.warning] WARNING:
> /pci at 0,0/pci8086,3b4a at 1c,4/pci-ide at 0/ide at 0 (ata0):
> Jun 10 10:08:35 jaguar  timeout: abort device, target=0 lun=0
> Jun 10 10:08:35 jaguar scsi: [ID 107833 kern.warning] WARNING:
> /pci at 0,0/pci8086,3b4a at 1c,4/pci-ide at 0/ide at 0 (ata0):
> Jun 10 10:08:35 jaguar  timeout: reset target, target=0 lun=0
> Jun 10 10:08:35 jaguar scsi: [ID 107833 kern.warning] WARNING:
> /pci at 0,0/pci8086,3b4a at 1c,4/pci-ide at 0/ide at 0 (ata0):
> Jun 10 10:08:35 jaguar  timeout: reset bus, target=0 lun=0
> Jun 10 10:08:58 jaguar scsi: [ID 107833 kern.warning] WARNING:
> /pci at 0,0/pci8086,3b4a at 1c,4/pci-ide at 0/ide at 0 (ata0):
> Jun 10 10:08:58 jaguar  timeout: abort request, target=0 lun=0
> Jun 10 10:08:58 jaguar scsi: [ID 107833 kern.warning] WARNING:
> /pci at 0,0/pci8086,3b4a at 1c,4/pci-ide at 0/ide at 0 (ata0):
> Jun 10 10:08:58 jaguar  timeout: abort device, target=0 lun=0
> Jun 10 10:08:58 jaguar scsi: [ID 107833 kern.warning] WARNING:
> /pci at 0,0/pci8086,3b4a at 1c,4/pci-ide at 0/ide at 0 (ata0):
> Jun 10 10:08:58 jaguar  timeout: reset target, target=0 lun=0
> Jun 10 10:08:58 jaguar scsi: [ID 107833 kern.warning] WARNING:
> /pci at 0,0/pci8086,3b4a at 1c,4/pci-ide at 0/ide at 0 (ata0):
> Jun 10 10:08:58 jaguar  timeout: reset bus, target=0 lun=0
> Jun 10 10:09:58 jaguar scsi: [ID 107833 kern.warning] WARNING:
> /pci at 0,0/pci8086,3b4a at 1c,4/pci-ide at 0/ide at 0 (ata0):
> Jun 10 10:09:58 jaguar  timeout: early timeout, target=0 lun=0
> Jun 10 10:09:58 jaguar genunix: [ID 859416 kern.info]
> ghd_timer_newstate: HBA reset failed hba 0xffffff01ce0f3900 gcmdp 0x0
> gtgtp 0xffffff01d0598100
> Jun 10 10:10:58 jaguar scsi: [ID 107833 kern.warning] WARNING:
> /pci at 0,0/pci8086,3b4a at 1c,4/pci-ide at 0/ide at 0 (ata0):
> Jun 10 10:10:58 jaguar  timeout: abort request, target=0 lun=0
> Jun 10 10:10:58 jaguar scsi: [ID 107833 kern.warning] WARNING:
> /pci at 0,0/pci8086,3b4a at 1c,4/pci-ide at 0/ide at 0 (ata0):
> Jun 10 10:10:58 jaguar  timeout: abort device, target=0 lun=0
> Jun 10 10:10:58 jaguar scsi: [ID 107833 kern.warning] WARNING:
> /pci at 0,0/pci8086,3b4a at 1c,4/pci-ide at 0/ide at 0 (ata0):
> Jun 10 10:10:58 jaguar  timeout: reset target, target=0 lun=0
> Jun 10 10:10:58 jaguar scsi: [ID 107833 kern.warning] WARNING:
> /pci at 0,0/pci8086,3b4a at 1c,4/pci-ide at 0/ide at 0 (ata0):
> Jun 10 10:10:58 jaguar  timeout: reset bus, target=0 lun=0
>
> I know the drive works as I've been testing it in another machine, but
> the moment I plug it in, the system has problems.