[OpenIndiana-discuss] mapping target number to disk?

Dan Swartzendruber dswartz at druber.com
Mon Jun 11 13:10:02 UTC 2012


I've been seeing a ton of messages like:

 

Jun 11 08:59:08 nas     Log info 0x31120303 received for target 9.

Jun 11 08:59:08 nas     scsi_status=0x0, ioc_status=0x804b, scsi_state=0xc

Jun 11 08:59:08 nas scsi: [ID 365881 kern.info]
/pci at 0,0/pci8086,27d0 at 1c/pci1000,3040 at 0 (mpt_sas10):

 

root pool is a single sata drive:

 

        NAME                        STATE     READ WRITE CKSUM

        rpool                       ONLINE       0     0     0

          c10t5000C5000D3C80FDd0s0  ONLINE       0     0     0

 

tank pool is 6 sata drives with a sas and ssd as cache:

 

        NAME                        STATE     READ WRITE CKSUM

        tank                        ONLINE       0     0     0

          mirror-0                  ONLINE       0     0     0

            c9t50014EE2AF872299d0   ONLINE       0     0     0

            c1t50014EE2AEDF73CEd0   ONLINE       0     0     0

          mirror-1                  ONLINE       0     0     0

            c3t50014EE206CED4ECd0   ONLINE       0     0     0

            c2t50014EE25C240034d0   ONLINE       0     0     0

          mirror-2                  ONLINE       0     0     0

            c13t50014EE204411A53d0  ONLINE       0     0     0

            c6t50014EE0ABCEE0A9d0   ONLINE       0     0     0

        cache

          c5t500A07510324D633d0     ONLINE       0     0     0

          c8t5000CCA00B078F2Dd0     ONLINE       0     0     0

 

How do I map 'target 9' to a drive?  Google was not remotely helpful - the
only thread I found recommended downloading lsiutil (which I can't find
anywhere).  I installed sasinfo, which prints a lot of info, but nothing
obviously useful to me.  Any help appreciated...



More information about the OpenIndiana-discuss mailing list