[OpenIndiana-discuss] Static routes

[Robbie Crash]

Set the IP, and a subnet mask; leave routing alone.

For example, I have 192.168.2.x/24 as my internet facing connection. The
direct link between a windows server and my OI box is 192.168.20.x/30. So
the Windows box is .1 and the OI box is .2. No static routes needed. Just
let the two OS's handle it. All traffic properly goes where it should.
On Jun 27, 2012 9:27 PM, "drsgrid" <drs.grid at gmail.com> wrote:

> Im not a full time admin but im trying to use rsync across 10GE (or even
> 1GE -as a starting point) from one openindana box to another. Both machines
> are also connected to a broader network to receive updates (eth0)  but im
> trying to use a xover cable for eth1 so i can rsync across and not take up
> a lot of bandwith on the broader network. From my reading think I need to
> setup a static route on eth1.   All my ip addresses are static: -
>
> machineA(eth0)=192.168.0.100, machineA(eth1)=192.168.10.2
> machineB(eth0)=192.168.0.108, machineB(eth1)=192.168.10.1
>
> how do i setup the machines so that i can do an rsync across the
> 192.168.10.x domain so as not to disturb bandwith on the 192.168.0.x
> domain?
> _______________________________________________
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>