[OpenIndiana-discuss] Problems using the SuperMicro X8STi-F MB IPMI/BMC and Supermicro IPMIView20, anyone?

[Richard PALO]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Just found a different entry point as well
(http://www.supermicro.com/support/faqs/faq.cfm?faq=9421)
=============================================================
according to the IPMI documentation you can use ssh to access the
modules but there is no detailed information about it.
- ------
Answer
- ------
These are the ssh commands;

- - Show information about the host:
show /system0

- - Show information about the BMC:
show /system1

- - Read all numeric sensors:
show /system0/nsensor*

- - Power up/down/reset the host
start /system0
stop /system0
reset /system0

- - Reset the BMC
reset /system1

- - Show the SEL:
show /system1/log0

================================

try :
$ ssh ADMIN@<ip-address-bmc>
[respond to the password prompt]

ATEN SMASH-CLP System Management Shell, version 1.02
Copyright (c) 2008-2009 by ATEN International CO., Ltd.
All Rights Reserved


- -> help
/

  The managed element is the root

  Verbs :
	cd
	show
	help
	version
	exit


- ->


==========
this is actually quite cool!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.13 (SunOS)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJPWxlrAAoJECAB22fHtp27n/IH/1nGZt8iLpkuz9KweSJ0ilvD
12jvjJTldIdrDh6RVho5bBHsRAnCRzCJ1Lb2tBN9YhdL1G6Ea8K+puUTZF/cdXcT
W05Ce5aH+mL1Orooh/xjqY3nMcqjAcBMhZnkR2L9AU47vYa3Tq38KL6knjG2CO09
Vax/ERP6aM8B5vJk3nz73VpEtLcm5WVmRTFxwqlRSauJkDzw0MBijK2kbGz5sV9W
dTAk6J5mcY24EgKMntoPB+et5MkjhHysYHYkYDV3fiACzCJwn4OkLfiwliqH/Zfg
ye1IZpynu2MECXYqCHU3uKbrHjRSoD71cK7z3D8l924wy+WP8Y4cXEPlUKJzzdg=
=L1oZ
-----END PGP SIGNATURE-----