[OpenIndiana-discuss] Openindiana under HP ML150

[C. L. Martinez]

Uhmm ... I see. But how can I install hp driver during openindiana
setup process?? and what about when I do a pkg-image update?? Do I
need to reinstall this driver every time??

On Mon, Mar 12, 2012 at 1:17 PM, ken mays <maybird1776 at yahoo.com> wrote:
> The HP updated CPQary3 2.4.6 driver works per discussion:
> https://www.illumos.org/issues/1441
>
> ~ Ken Mays
>
> ________________________________
> From: C. L. Martinez <carlopmart at gmail.com>
> To: Discussion list for OpenIndiana <openindiana-discuss at openindiana.org>
> Sent: Monday, March 12, 2012 5:14 AM
> Subject: Re: [OpenIndiana-discuss] Openindiana under HP ML150
>
> On Mon, Mar 12, 2012 at 10:06 AM, Milan Jurik <milan.jurik at xylab.cz> wrote:
>> Hi,
>>
>>
>> On 12.03.2012 10:10, C. L. Martinez wrote:
>>>
>>> Hi all,
>>>
>>>  I need to install an openindiana 151a server to act as a iscsi server
>>> and to deploy two oi zones. To accomplish this, I need to install OI
>>> in a HP ML150 server with an HP SmartArray E200 controller. Is this
>>> server supported under OI? Any problem ??
>>>
>>> Thanks.
>>>
>>
>> well, it depends on generation you want to use. I saw some of them to
>> work.
>>
>> cpqary3 driver from HP is integrated in some version in OI and should work
>> for you. But it is closed source driver from HP, so every trouble with it
>> must be handled with HP. It should be safe to replace it with the latest
>> version from HP if available.
>>
>> Best regards,
>>
>> Milan
>>
>
> Thanks Milan, but there is no driver for OpenIndiana in hp's website
> ... Only exists for Solaris 10 x86 and I doubt that works ...
>
> _______________________________________________
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>
>