[OpenIndiana-discuss] Multipathing help

[Willi Schiegel]

Did that, but it did not work

root at fs:~# stmsboot -D fp -e
STMS is already enabled. No changes or reboots needed

But I still can see eaxh drive on each path.

....Willi

On 03/28/2012 06:39 PM, Russell Hansen wrote:
> I believe you need to run `stmsboot -u` since you manually updated your fp.conf file.  You could have left fp.conf alone and run `stmsboot -D fp -e` or possibly even `stmsboot -e`.  You should be prompted for a reboot.
>
> -Russ
>
> ________________________________________
> From: Willi Schiegel [willi.schiegel at technologit.de]
> Sent: Wednesday, March 28, 2012 5:26 AM
> To: openindiana-discuss at openindiana.org
> Subject: [OpenIndiana-discuss] Multipathing help
>
> Hi All,
>
> I have oi151a installed on an IBM x3550 M3 server which has two Qlogic 8
> Gb FC HBAs installed. The HBAs are connected to a IBM DS3524 Storage.
> I'm not able to get multipathing working.
>
> I can list the initiator
>
> root at fs:~# mpathadm list initiator-port
> Initiator Port:  iqn.1986-03.com.sun:01:ffffffffffff.4f72fd90,4000002a00ff
> Initiator Port:  21000024ff027a73
> Initiator Port:  21000024ff027a1c
>
> I have
>
> mpxio-disable="no";
>
> in /kernel/drv/fp.conf
>
> and
>
> device-type-scsi-options-list =
> "IBM         1746", "symmetric-option";
>
> symmetric-option = 0x1000000;
>
> in /kernel/drv/scsi_vhci.conf
>
> I still see each drive on each path. What else can I do?
>
> Thank you.
>
> Best,
> Willi
>
> _______________________________________________
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>
> _______________________________________________
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss