[OpenIndiana-discuss] Building in zones

[Andrew Myers]

Hello,

I'm trying to set up my system for building in zones as described in the documentation here:

http://wiki.openindiana.org/oi/Building+in+zones

I believe I've followed the instructions correctly, however I am unable to access the internet in my zone.  I'm running oi151a as a guest on VirtualBox on a Windows 7 host.  My network interface is set up as as a bridged interface to my pc's wireless card.

The output of ifconfig -a is shown below.

Can anyone assist me please with trying to get connectivity working in my build zone?

Regards,
Andrew.

andrew at openindiana:~$ ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000 
e1000g0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 2
    inet 10.0.0.7 netmask ffffff00 broadcast 10.0.0.255
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
    inet6 ::1/128 
e1000g0: flags=20002004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu 1500 index 2
    inet6 fe80::a00:27ff:fee2:644f/10 
andrew at openindiana:~$ ping www.yahoo.com
www.yahoo.com is alive
andrew at openindiana:~$ 


root at zone1:~# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000 
vnic0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 2
    inet 10.0.0.8 netmask ffffff00 broadcast 10.0.0.255
    ether 2:8:20:c6:27:23 
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
    inet6 ::1/128 
root at zone1:~# ping www.yahoo.com
ping: unknown host www.yahoo.com
root at zone1:~#