[OpenIndiana-discuss] usb audio

[Udo Grabowski (IMK)]

On 16/10/2012 12:14, Andrey N. Oktyabrski wrote:
> On 10/16/2012 01:56 PM, Laurent Blume wrote:
>> On 16/10/12 05:59, Andrey N. Oktyabrski wrote:
>>> Good day.
>> <snip>
>>> $ prtconf -D
>>> ...
>>> pci17aa,20aa, instance #2 (driver name: uhci)
>>> device, instance #4 (driver name: usb_mid)
>>> input, instance #4 (driver name: hid)
>>> sound-control, instance #0 (driver name: usb_ac)
>>> ...
>>>
>>> But I haven't any usable devices for it. Can I use this card, or current
>>> drivers does not support it?
>>
>> You are not getting any /dev/sound/xx devices when you plug it? One
>> common problem in Solaris is that the /dev/audio symlinks are rarely
>> updated in the way the user expects when audio devices are plugged in/out.
> How can I update that? devfsadm doesn't help, and I don't know other way.

I found that these entries in /etc/dacf.conf formerly present in
Osol 2009.06 are missing now:

#
# Configure and/or unconfigure usb audio devices.
# usb_ac as a mux for hid and usb_as devices.
#
driver-minorname="usb_ac:mux" usb_ac_dacf:usb_audio_config post-attach -
driver-minorname="usb_ac:mux" usb_ac_dacf:usb_audio_config pre-detach -

The /etc/driver_aliases entry is still there, the /kernel/drv/usb_ac is
there, and the /kernel/drv/usb_ac.conf file has this promising entry commented:
#
# Uncomment reset-configuration to cause the usb_ac driver's state to
# be reset to the default when the driver is loaded. Otherwise this state
# is retained across driver unload/reload cycles, but not across reboots.
#
#reset-configuration=1;

Maybe inserting the above lines and uncommenting this one followed
by a reboot helps ?
-- 
Dr.Udo Grabowski    Inst.f.Meteorology a.Climate Research IMK-ASF-SAT
www-imk.fzk.de/asf/sat/grabowski/ www.imk-asf.kit.edu/english/sat.php
KIT - Karlsruhe Institute of Technology            http://www.kit.edu
Postfach 3640,76021 Karlsruhe,Germany  T:(+49)721 608-26026 F:-926026