[OpenIndiana-discuss] Seagate 3000GB Drive only shows 746GB
Rainer Heilke
rheilke at dragonhearth.com
Fri Sep 28 11:27:46 UTC 2012
When I did a zpool create, it built a 744GB pool.
Rainer
On 9/28/2012 4:13 AM, Sašo Kiselkov wrote:
> On 09/28/2012 01:06 PM, Rainer Heilke wrote:
>> Greetings.
>>
>> I've connected a Seagate 3000GB HDD to my OpenIndiana oi_151.1.6 X86
>> server. But when I try to use it, only 746GB show. Printing the
>> partition table from format shows:
>> partition> pri
>> Current partition table (original):
>> Total disk cylinders available: 48722 + 2 (reserved cylinders)
>>
>> Part Tag Flag Cylinders Size Blocks
>> 0 unassigned wm 0 0 (0/0/0) 0
>> 1 unassigned wm 0 0 (0/0/0) 0
>> 2 backup wu 0 - 48721 746.46GB (48722/0/0) 1565437860
>> 3 unassigned wm 0 0 (0/0/0) 0
>> 4 unassigned wm 0 0 (0/0/0) 0
>> 5 unassigned wm 0 0 (0/0/0) 0
>> 6 unassigned wm 0 0 (0/0/0) 0
>> 7 unassigned wm 0 0 (0/0/0) 0
>> 8 boot wu 0 - 0 15.69MB (1/0/0) 32130
>> 9 unassigned wm 0 0 (0/0/0) 0
>>
>> format> inq
>> Vendor: ST3000DM
>> Product: 001-9YN166
>> Revision:
>>
>> Total disk size is 48725 cylinders
>> Cylinder size is 32130 (512 byte) blocks
>>
>> Cylinders
>> Partition Status Type Start End Length %
>> ========= ====== ============ ===== === ====== ===
>> 1 Active Solaris 1 48724 48724 100
>>
>>
>> So, how can I get ZFS to see the full 3TB?
> Are you trying to use this driver for rpool? If not, you can simply tell
> ZFS to use the entire drive, which should bypass any potential
> partitioning issues.
>
> Cheers,
> --
> Saso
>
--
Mind the Gap
Web: http://www.dragonhearth.com
Blog: http://chaos.dragonhearth.com
More information about the OpenIndiana-discuss
mailing list