[OpenIndiana-discuss] Unable to load RAID driver

[Sašo Kiselkov]

Hi Lawrence,

Why would you need to do an add_drv after reflashing? These cards should
work out of the box with oi151a7.

--
Saso

On 02/25/2013 02:48 PM, Lawrence wrote:
> Hi All,
> 
> I have a IBM ServeRAID M1015 RAID controller which I tried to cross-flash to LSA 9211-8i IT mode as mentioned in this website: http://www.servethehome.com/ibm-serveraid-m1015-part-4/.
> 
> I have a IBM x3650 M3 server which I then use with the ServeRAID M1015 raid card to test if my card is working in the IT mode as mentioned. I have tried booting using OpenIndiana 151a and 151a7 LiveCD/USB to try and detect the card. The system is able to detect the raid card but when I tried to add the drivers "mpt_sas" to the system, I got the following errors:
> 
> root at openindiana:~# add_drv -i
>                                   "pci1014,3b1" mpt_sas 
> devfsadm: driver failed to attach:
>                                   mpt_sas 
> Warning: Driver (mpt_sas) successfully
>                                   added to system but failed to attach 
> 
> Feb 21 17:14:22 openindiana scsi: [ID
>                                   107833 kern.warning] WARNING:
>                                   /pci at 0,0/pci8086,3410 at 9/pci1014,3b1 at 0
>                                   (mpt_sas0): 
> Feb 21 17:14:22 openindiana hard reset
>                                   failed! 
> Feb 21 17:14:22 openindiana scsi: [ID
>                                   107833 kern.warning] WARNING:
>                                   /pci at 0,0/pci8086,3410 at 9/pci1014,3b1 at 0
>                                   (mpt_sas0): 
> Feb 21 17:14:22 openindiana mptsas
>                                   chip initialization failed 
> Feb 21 17:14:22 openindiana scsi: [ID
>                                   107833 kern.warning] WARNING:
>                                   /pci at 0,0/pci8086,3410 at 9/pci1014,3b1 at 0
>                                   (mpt_sas0): 
> Feb 21 17:14:22 openindiana attach
>                                   failed
> 
> Boot to the RAID controller, I gathered the following information:
> Firmware Version: 2.70.74-1038
> FW Package Version: 20.5.1-0014
> FW Time: Oct 13 2010, 13:52:10
> WebBIOS Version: 4.0-e_24-Rel
> SubVendor ID: 0x1014
> SubDevice ID: 0x3b1
> 
> Doing a scanpci:
> sudo scanpci | less #search for LSI
> pci bus 0x0010 cardnum 0x00 function 0x00: vendor 0x1000 device
>     0x0073
>  LSI Logic / Symbios Logic MegaRAID SAS 2008 [Falcon]
> ===========
> 
> So it does find the card.  And then prtconf:
> =====================
> jack at openindiana:~$ prtconf -Dv | less #search for 73
>                         pci1014,3b1 (driver name: mpt_sas)
>                 Hardware properties:
>                     name='pci-msix-capid-pointer' type=int items=1
>                         value=000000c0
>                     name='pci-msi-capid-pointer' type=int items=1
>                         value=000000a8
>                     name='assigned-addresses' type=int items=15
>                        
> value=81100010.00000000.00001000.00000000.00000100.83100014.00000000.92940000.00000000.00004000.8310001c.000
> 00000.92900000.00000000.00040000
>                     name='reg' type=int items=20
>                        
> value=00100000.00000000.00000000.00000000.00000000.01100010.00000000.00000000.00000000.00000100.03100014.000
> 00000.00000000.00000000.00004000.0310001c.00000000.00000000.00000000.00040000
>                     name='compatible' type=string items=13
>                         value='pciex1000,73.1014.3b1.3' +
>     'pciex1000,73.1014.3b1' + 'pciex1000,73.3' + 'pciex1000,73' +
>     'pciexclass,010400' + 'pciexclass,0104' + 'pci1000,73.1014.3b1.3' +
>     'pci1000,73.1014.3b1' + 'pci1014,3b1' + 'pci1000,73.3' +
>     'pci1000,73' + 'pciclass,010400' + 'pciclass,0104'
>                     name='model' type=string items=1
>                         value='RAID controller'
>                     name='power-consumption' type=int items=2
>                         value=00000001.00000001
>                     name='devsel-speed' type=int items=1
>                         value=00000000
>                     name='interrupts' type=int items=1
>                         value=00000001
>                     name='subsystem-vendor-id' type=int items=1
>                         value=00001014
>                     name='subsystem-id' type=int items=1
>                         value=000003b1
>                     name='unit-address' type=string items=1
>                         value='0'
>                     name='class-code' type=int items=1
>                         value=00010400
>                     name='revision-id' type=int items=1
>                         value=00000003
>                     name='vendor-id' type=int items=1
>                         value=00001000
>                     name='device-id' type=int items=1
>                         value=00000073
> 
> ===============
> 
> With the OI 151a7 liveUSB, I noticed that in the Device Driver Utility, the system is saying the RAID card is misconfigured.
> 
> I have tried using an Ubuntu LiveCD and it can see the card and is able to detect the harddisks that is attached to the card.
> 
> 
> Does anyone have any similiar experience? Is there any other drivers or setting that I need to configure?
> 
> Best Regards.
> _______________________________________________
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>