[OpenIndiana-discuss] FC HBA

[James Relph]

Turns out that the settings provided by the manufacturer of the array were incorrect (typically).  For what it's worth the setting to get RamSan units using multipath is to add:

scsi-vhci-failover-override = 
        "TMS     RamSan", "f_sym";

Just the two lines, works fine now.  The documentation I'd had from the supplier used the old device-type-scsi-options-list = and I hadn't twigged that that had been replaced with the above - so was looking for errors in the wrong places.

Thanks for the replies, appreciate the time and at least it was a (very) simple one in the end.

James.