[OpenIndiana-discuss] Static IP problem

[Jonathan Adams]

okay, I'm sure you've tried all this ...

Falling back to old "ifconfig" commands.

svcadm disable svc:/network/physical:nwam
svcadm enable svc:/network/physical:default

ipadm delete-addr bge0/v4

ifconfig bge0 plumb
ifconfig bge0 192.168.0.2 netmask 255.255.255.0 up

route add -p default 192.168.0.1

does that work any better?



On 7 July 2014 05:06, Michelle Knight <michelle at msknight.com> wrote:

>
>
> On Sun, 06 Jul 2014 17:37:46 -0400
> John D Groenveld <jdg117 at elvis.arl.psu.edu> wrote:
> > What state do these command report?
> >
> > # dladm show-phys bge0
> Up 1000 full
>
> > # ipadm show-addr bge0/v4
> static disabled 192.168.0.25/24
>
> To also answer Jonathan, yes, it was plugged in and active to a home
> network with a DHCP server; which is something I am careful to do
> during initial installation even, otherwise bge0 seems to be a lot
> harder work than this! :-)
>
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>