[OpenIndiana-discuss] Disk Free Question

[DormitionSkete@hotmail.com]

Ok.  Thank you.

I’ll turn off "svc:/network/location:default”.

The UPS daemon failed because it was disconnected from the LAN, and could not communicate with the NUT master server.  No big deal.

I’ll turn off automatic snapshots, too.  I never used them anyway.  I think I just started them because I was new to all of this last year.

Thank you very much for your help. 

I *greatly* appreciate it.




On Jul 7, 2014, at 2:21 PM, James Carlson <carlsonj at workingcode.com> wrote:

> On 07/07/14 15:52, DormitionSkete at hotmail.com wrote:
>> Then I thought, well, maybe something in the zones are causing this, so I booted them back up and ran dmesg again.
>> 
>> "# dmesg” — with the non-global zones running — shows this:
> 
> The first thing that really stands out to me is this:
> 
>> Jul  7 12:56:29 baptist.ds svc.startd[10]: [ID 122153 daemon.warning] svc:/network/location:default: Method or service exit timed out.  Killing contract 61.
>> Jul  7 12:56:29 baptist.ds svc.startd[10]: [ID 636263 daemon.warning] svc:/network/location:default: Method "/lib/svc/method/net-loc start" failed due to signal KILL.
> 
> That looks like a waste of time.  If this isn't a portable system (i.e.,
> a laptop), then I'd disable that service.  Or at least look into why
> it's failing miserably and slowing down the boot process.
> 
>> Jul  7 12:58:39 baptist.ds upsd[679]: [ID 702911 daemon.error] not listening on 192.168.0.5 port 3493
>> Jul  7 12:58:39 baptist.ds upsd[679]: [ID 702911 daemon.error] no listening interface available
> 
> Also, it looks like your UPS daemon might have configuration problems.
> 
>> Jul  7 13:26:52 baptist.ds time-sliderd: [ID 702911 daemon.notice] No more hourly snapshots left
>> Jul  7 13:26:52 baptist.ds time-sliderd: [ID 702911 daemon.warning] rpool exceeded 80% capacity. Hourly and daily automatic snapshots were destroyed
>> Jul  7 13:26:52 baptist.ds time-sliderd: [ID 702911 daemon.notice] 239 automatic snapshots were destroyed
> 
> Yow.  That would certainly take some time.
> 
> For what it's worth, I don't run time slider.  I do my own snapshots
> using my own scripts.  I ran into problems with the early
> implementations of time slider and just gave up on it.
> 
> I can't speak to its current incarnation, because I'm uninterested in
> using it.  Your mileage may vary.
> 
> -- 
> James Carlson         42.703N 71.076W         <carlsonj at workingcode.com>
> 
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>