[OpenIndiana-discuss] Replacing an unavailable hd...
John Ryan
john.ryan at bsse.ethz.ch
Mon Jun 16 17:24:09 UTC 2014
On 16/06/2014 3:18 PM, John Doe via openindiana-discuss wrote:
> I went onsite to replace the disk.
> zpool offline VOLUME c5t2d0 + unplug old, plug new
> And nothing happens...
> There was this in messages:
> Jun 14 02:30:12 data-4 ahci: [ID 517647 kern.warning] WARNING: ahci0:
> watchdog port 2 satapkt 0xffffff06cd8cbc68 timed out
> Jun 14 02:30:23 data-4 ahci: [ID 860969 kern.warning] WARNING: ahci0:
> ahci_port_reset port 2 the device hardware has been initialized and the
> power-up diagnostics failed
> Jun 14 02:30:24 data-4 sata: [ID 801845 kern.info] /pci at 0,0/pci15d9,62f at 1f,2:
> Jun 14 02:30:24 data-4 SATA port 2 error
> Jun 14 02:30:24 data-4 scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci15d9,62f at 1f,2/disk at 2,0 (sd3):
> Jun 14 02:30:24 data-4 SYNCHRONIZE CACHE command failed (5)
> Jun 14 02:30:25 data-4 sata: [ID 801845 kern.info] /pci at 0,0/pci15d9,62f at 1f,2:
> Jun 14 02:30:25 data-4 SATA port 2 error
> ...
> I tried:
> cfgadm -cconnect xxx and get:
> cfgadm: Insufficient condition
> Nothing new in /var/adm/messages.
> cfgadm still says
> sata0/2 sata-port disconnected unconfigured failed
> I guess "sata-port"
> So I guess this sata port is bad (or just disabled?)...
> And of course, that's one of these servers that must stays on 24h/24...
> Is there a way to make the kernel try to reinitialize this sata port appart from a reboot?
Try `fmadm faulty`
Then `fmadm repaired <whatever the "Affects" string is>`
Then cfgadm commands
John
>
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
More information about the openindiana-discuss
mailing list