[OpenIndiana-discuss] boot hang after power loss

Wed Jun 25 11:07:45 UTC 2014

On 06/25/14 12:45, Евгений Парфенов wrote:
> Seems like problem comes when network trying to up. Have you tried compile
> newer version of network card driver?
No, didn't try that. Are there any known bugs in the e1000g driver? Or 
some bad interaction with the gld driver? I always thought the e1000g is 
a rather stable one.

Anyways: after booting once with parameters disable-e1000g and 
disable-gld, and another normal shutdown/reboot cycle, I'm up and 
running again. The box booted without any problem.

I'm still puzzled, next time at least I have a workaround.

Maybe some timing problems caused by parallel subsystem startup (smf)?

Cheers,
Michael

> 25.06.2014 20:42 пользователь "Michael Hase" <michael at edition-software.de>
> написал:
>
>> Update: now I managed to get an mdb prompt after sending multiple breaks
>> just before the smf [ network... ] messages:
>>
>> ...
>> pseudo-device: audio0
>> hid10 is /pci at 0,0/pci1734,11cb at 1d/hub at 1/keyboard at 2
>> audio0 is /pseudo/audio at 0
>> /pci at 0,0/pci1734,11cb at 1d/hub at 1/keyboard at 2 (hid10) online
>> pseudo-device: stmf_sbd0
>> stmf_sbd0 is /pseudo/stmf_sbd at 0
>> ~
>> Welcome to kmdb
>> kmdb: unable to determine terminal type: assuming `vt100'
>> Loaded modules: [ scsi_vhci stmf_sbd mac uppc neti sd unix mpt zfs krtld
>> s1394
>> apix nca uhci hook genunix ip usba specfs pcplusmp cpu.generic arp stmf
>> sockfs
>>   ]
>> [1]> moddebug/W 80000000
>> moddebug:       0               =       0x80000000
>> [1]> :c
>> [ network/ip-interface-management:default starting (IP interface
>> management) ]
>> [ network/netcfg:default starting (Network configuration data management) ]
>> [ network/datalink-management:default starting (data-link management
>> daemon) ]
>> load 'drv/log' id 163 loaded @ 0xfffffffff80236d8/0xffffffffc0128b68 size
>> 2320/568
>> installing log, module id 163.
>> load 'drv/sysevent' id 164 loaded @ 0xfffffffff80b0000/0xffffffffc0128da0
>> size 5360/368
>> installing sysevent, module id 164.
>> load 'drv/softmac' id 165 loaded @ 0xfffffffff80b2000/0xffffffffc012a110
>> size 37416/2912
>> installing softmac, module id 165.
>> [ network/loopback:default starting (loopback network interface) ]
>> load 'socketmod/rts' id 166 loaded @ 0xfffffffff7d8ac38/0xffffffffc012ac70
>> size 952/688
>> installing rts, module id 166.
>> uninstalled rts
>> unloading rts, module id 166, loadcnt 1.
>> load 'socketmod/rts' id 166 loaded @ 0xfffffffff7d8ac38/0xffffffffc012ac70
>> size 952/688
>> installing rts, module id 166.
>> uninstalled rts
>> unloading rts, module id 166, loadcnt 2.
>> [ network/physical:default starting (physical network interfaces) ]
>> load 'drv/e1000g' id 167 loaded @ 0xfffffffff80bc000/0xffffffffc012b000
>> size 234136/1024
>> installing e1000g, module id 167.
>> load 'mac/mac_ether' id 168 loaded @ 0xfffffffff7ccf3c8/0xffffffffc012c000
>> size 3120/3680
>> installing mac_ether, module id 168.
>> load 'dacf/net_dacf' id 169 loaded @ 0xfffffffff7d0dd40/0xffffffffc0128f10
>> size 696/192
>> installing net_dacf, module id 169.
>> load 'drv/vnic' id 170 loaded @ 0xfffffffff80f6000/0xffffffffc012ac70
>> size 8048/616
>> installing vnic, module id 170.
>> load 'misc/gld' id 172 loaded @ 0
>>
>> So it seems to hang when trying to load the misc/gld driver. After this no
>> chance to send another break or get back to the kmdb console.
>> Any ideas what to do next?
>>
>> Michael
>>
>> On 06/25/14 12:19, Michael Hase wrote:
>>
>>> Hi,
>>>
>>> my oi_151a7 box (fujitsu siemens tx100 s3p) repeatedly hung at boot time
>>> on power loss or using the power button. Bootings starts and the last
>>> message with boot options -m verbose -kv is
>>>
>>> [ network/physical:default starting (physical network interfaces) ]
>>>
>>> Last kernel message is
>>>
>>> stmf_sbd0 is /pseudo/stmf_sbd at 0
>>>
>>> When booting from usb I can import the root pool without any problems,
>>> hardware seems ok, disks look ok, networking (intel e1000) is ok. root pool
>>> consists of two mirrored 2.5" sas disks connected to an lsi sas controller.
>>> After exporting the pool and reboot it sometimes boots and sometimes hangs,
>>> today it seems to hang permanently. In case of a hang the usb keyboard
>>> doesn't work anymore, the keyboard lights on caps lock/num lock are dead.
>>> F1-A doesn't work (I think this doesn't work with an usb keyboard anyway).
>>> When shutting down normally, the box booted without problems til now.
>>>
>>> Now I attached a serial console, great to have an old sun ultra 60
>>> around, which boots without any problem after two years. Please find the
>>> output of the boot process below. I thought I can access the kernel
>>> debugger via serial console, but a break doesn't do anything.
>>>
>>> Does anybody have an idea how to access the kernel debugger in this case?
>>>
>>> Do I have to disable/disconnect the keyboard when using the serial
>>> console? I just added console=ttya on the grub command line, nothing else
>>> changed.
>>>
>>> Did someone see similiar behaviour of boot hangs after power loss?
>>>
>>> Thanks,
>>> Michael
>>>
>>>
>>> serial console output:
>>> -----------------------------
>>> module /platform/i86pc/kernel/amd64/unix: text at [0xfffffffffb800000,
>>> 0xfffffffffb96500b] data at 0xfffffffffbc00000
>>> module /kernel/amd64/genunix: text at [0xfffffffffb965010,
>>> 0xfffffffffbbed857] data at 0xfffffffffbc954c0
>>> Loading kmdb...
>>> module /kernel/misc/amd64/kmdbmod: text at [0xfffffffffbd05090,
>>> 0xfffffffffbdba4d7] data at 0xfffffffffbdba4e0
>>> module /kernel/misc/amd64/ctf: text at [0xfffffffffbbed860,
>>> 0xfffffffffbbf81b7] data at 0xfffffffffbdd6490
>>> OpenIndiana Build oi_151a7 64-bit (illumos 13815:61cf2631639d)
>>> SunOS Release 5.11 - Copyright 1983-2010 Oracle and/or its affiliates.
>>> All rights reserved. Use is subject to license terms.
>>> x86_feature: lgpg
>>> x86_feature: tsc
>>> x86_feature: msr
>>> x86_feature: mtrr
>>> x86_feature: pge
>>> x86_feature: de
>>> x86_feature: cmov
>>> x86_feature: mmx
>>> x86_feature: mca
>>> x86_feature: pae
>>> x86_feature: cv8
>>> x86_feature: pat
>>> x86_feature: sep
>>> x86_feature: sse
>>> x86_feature: sse2
>>> x86_feature: htt
>>> x86_feature: asysc
>>> x86_feature: nx
>>> x86_feature: sse3
>>> x86_feature: cx16
>>> x86_feature: cmp
>>> x86_feature: tscp
>>> x86_feature: mwait
>>> x86_feature: cpuid
>>> x86_feature: ssse3
>>> x86_feature: sse4_1
>>> x86_feature: sse4_2
>>> x86_feature: clfsh
>>> x86_feature: 64
>>> x86_feature: aes
>>> x86_feature: pclmulqdq
>>> x86_feature: xsave
>>> x86_feature: avx
>>> x86_feature: vmx
>>> mem = 25132860K (0x5fdfcf000)
>>> SMBIOS v2.7 loaded (2898 bytes)initialized model-specific module
>>> 'cpu_ms.GenuineIntel' on chip 0 core 0 strand 0
>>> root nexus = i86pc
>>> pseudo0 at root
>>> pseudo0 is /pseudo
>>> scsi_vhci0 at root
>>> scsi_vhci0 is /scsi_vhci
>>> Reading Intel IOMMU boot options
>>> npe0 at root: space 0 offset 0
>>> npe0 is /pci at 0,0
>>> PCI Express-device: isa at 1f, isa1
>>> pseudo-device: acpippm0
>>> acpippm0 is /pseudo/acpippm at 0
>>> pseudo-device: ppm0
>>> ppm0 is /pseudo/ppm at 0
>>> PCI Express-device: pci8086,1c10 at 1c, pcieb10
>>> pcieb10 is /pci at 0,0/pci8086,1c10 at 1c
>>> /pci at 0,0/pci8086,1c10 at 1c/pci1000,3091 at 0 (mpt3):
>>>          Rev. 8 LSI, Inc. 1064E found.
>>> /pci at 0,0/pci8086,1c10 at 1c/pci1000,3091 at 0 (mpt3):
>>>          mpt3 supports power management.
>>> /pci at 0,0/pci8086,1c10 at 1c/pci1000,3091 at 0 (mpt3):
>>>          mpt3 Firmware version v1.23.4.0 (IR)
>>> /pci at 0,0/pci8086,1c10 at 1c/pci1000,3091 at 0 (mpt3):
>>>          mpt3: IOC Operational.
>>> /pci at 0,0/pci8086,1c10 at 1c/pci1000,3091 at 0 (mpt3):
>>>          NVDATA default version 0x2b00, persistent version
>>> 0x2b00PCIE-device: pci1000,3091 at 0, mpt3
>>> PCI Express-device: pci1000,3091 at 0, mpt3
>>> mpt3 is /pci at 0,0/pci8086,1c10 at 1c/pci1000,3091 at 0
>>> WARNING: No randomness provider enabled for /dev/random. Use
>>> cryptoadm(1M) to enable a provider.
>>> sd28 at mpt3: unit-address b,0: target b lun 0
>>> sd28 is /pci at 0,0/pci8086,1c10 at 1c/pci1000,3091 at 0/sd at b,0
>>> /pci at 0,0/pci8086,1c10 at 1c/pci1000,3091 at 0/sd at b,0 (sd28) online
>>> sd31 at mpt3: unit-address d,0: target d lun 0
>>> sd31 is /pci at 0,0/pci8086,1c10 at 1c/pci1000,3091 at 0/sd at d,0
>>> /pci at 0,0/pci8086,1c10 at 1c/pci1000,3091 at 0/sd at d,0 (sd31) online
>>> root on rpool2/ROOT/openindiana151a7 fstype zfs
>>> acpinex0 at root
>>> acpinex0 is /fw
>>> acpinex: cpu at 1, cpudrv4
>>> /fw/cpu at 1 (cpudrv4) online
>>> pseudo-device: dld0
>>> dld0 is /pseudo/dld at 0
>>> ISA-device: asy1
>>> asy1 is /pci at 0,0/isa at 1f/asy at 1,3f8
>>> PCI Express-device: pci8086,1c1c at 1c,6, pcieb11
>>> pcieb11 is /pci at 0,0/pci8086,1c1c at 1c,6
>>> PCI Express-device: pci8086,244e at 1e, pci_pci0
>>> pci_pci0 is /pci at 0,0/pci8086,244e at 1e
>>> PCI Express-device: pci1734,11cb at 1a, ehci2
>>> ehci2 is /pci at 0,0/pci1734,11cb at 1a
>>> PCI Express-device: pci1734,11cb at 1d, ehci3
>>> ehci3 is /pci at 0,0/pci1734,11cb at 1d
>>> cpu0: x86 (chipid 0x0 GenuineIntel 306A9 family 6 model 58 step 9 clock
>>> 3093 MHz)
>>> cpu0: Intel(r) Xeon(r) CPU E3-1220 V2 @ 3.10GHz
>>> initialized cpu module 'cpu.generic' on chip 0 core 1 strand 0
>>> initialized model-specific module 'cpu_ms.GenuineIntel' on chip 0 core 1
>>> strand 0
>>> initialized cpu module 'cpu.generic' on chip 0 core 2 strand 0
>>> acpinex: cpu at 2, cpudrv5
>>> initialized model-specific module 'cpu_ms.GenuineIntel' on chip 0 core 2
>>> strand 0
>>> /fw/cpu at 2 (cpudrv5) online
>>> cpu1: x86 (chipid 0x0 GenuineIntel 306A9 family 6 model 58 step 9 clock
>>> 3093 MHz)
>>> cpu1: Intel(r) Xeon(r) CPU E3-1220 V2 @ 3.10GHz
>>> cpu1 initialization complete - online
>>> initialized cpu module 'cpu.generic' on chip 0 core 3 strand 0
>>> acpinex: cpu at 3, cpudrv6
>>> initialized model-specific module 'cpu_ms.GenuineIntel' on chip 0 core 3
>>> strand 0
>>> /fw/cpu at 3 (cpudrv6) online
>>> cpu2: x86 (chipid 0x0 GenuineIntel 306A9 family 6 model 58 step 9 clock
>>> 3093 MHz)
>>> acpinex: cpu at 4, cpudrv7
>>> cpu2: Intel(r) Xeon(r) CPU E3-1220 V2 @ 3.10GHz
>>> /fw/cpu at 4 (cpudrv7) online
>>> cpu2 initialization complete - online
>>> cpu3: x86 (chipid 0x0 GenuineIntel 306A9 family 6 model 58 step 9 clock
>>> 3093 MHz)
>>> USB 2.0 device (usb8087,24) operating at hi speed (USB 2.x) on USB 2.0
>>> root hub: hub at 1, hubd0 at bus address 2
>>> cpu3: Intel(r) Xeon(r) CPU E3-1220 V2 @ 3.10GHz
>>> USB 2.0 device (usb8087,24) operating at hi speed (USB 2.x) on USB 2.0
>>> root hub: hub at 1, hubd1 at bus address 2
>>> cpu3 initialization complete - online
>>> hubd0 is /pci at 0,0/pci1734,11cb at 1a/hub at 1
>>> hubd1 is /pci at 0,0/pci1734,11cb at 1d/hub at 1
>>> /pci at 0,0/pci1734,11cb at 1a/hub at 1 (hubd0) online
>>> /pci at 0,0/pci1734,11cb at 1d/hub at 1 (hubd1) online
>>> pseudo-device: tzmon0
>>> tzmon0 is /pseudo/tzmon at 0
>>> USB 2.0 device (usb46a,1) operating at low speed (USB 1.x) on USB 2.0
>>> external hub: keyboard at 2, hid10 at bus address 3
>>>          Cherry GmbH
>>> hid10 is /pci at 0,0/pci1734,11cb at 1d/hub at 1/keyboard at 2
>>> /pci at 0,0/pci1734,11cb at 1d/hub at 1/keyboard at 2 (hid10) online
>>> pseudo-device: audio0
>>> audio0 is /pseudo/audio at 0
>>> pseudo-device: stmf_sbd0
>>> stmf_sbd0 is /pseudo/stmf_sbd at 0
>>> [ network/netcfg:default starting (Network configuration data management)
>>> ]
>>> [ network/datalink-management:default starting (data-link management
>>> daemon) ]
>>> [ network/ip-interface-management:default starting (IP interface
>>> management) ]
>>> [ network/loopback:default starting (loopback network interface) ]
>>> [ network/physical:default starting (physical network interfaces) ]
>>>
>>>
>>> _______________________________________________
>>> openindiana-discuss mailing list
>>> openindiana-discuss at openindiana.org
>>> http://openindiana.org/mailman/listinfo/openindiana-discuss
>>>
>>
>> _______________________________________________
>> openindiana-discuss mailing list
>> openindiana-discuss at openindiana.org
>> http://openindiana.org/mailman/listinfo/openindiana-discuss
>>
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss