[OpenIndiana-discuss] KVM in Zones && networking

[Calin Somoza]

No Connection to/from kvm Solaris 11 Guest:

LINK         MEDIA                STATE      SPEED  DUPLEX DEVICE
e1000g0      Ethernet             up         1000 full      e1000g0

LINK         OVER         SPEED  MACADDRESS MACADDRTYPE         VID
vnic0        e1000g0      1000   2:8:20:3d:aa:c3 random              0

LINK        CLASS     MTU    STATE    BRIDGE     OVER
e1000g0     phys      1500   up       --         --
vnic0       vnic      1500   up       --         e1000g0

Calin

Am 22.02.2016 um 13:38 schrieb John D Groenveld:
> In message <CAKr4wiTKqPNaRtgSR0tEOF30BsmfA5C=YvhdYZhmeZLg0_fcyQ at mail.gmail.com>
> , Jonathan Adams writes:
>> I have to ask, is there any particular reason that you're running the KVM
>> in a zone, as opposed to the global zone?
> Because its satisfying to think that should the KVM guest break
> out of its KVM sandbox, that it finds itself stuck in a zone
> sandbox.
>
> And because all services are provisioned as NGZs.
>
>> are you running network/physical or nwam? in the global, or in the zone?
>> have you passed through both vnics to the zone, did you plumb any/both of
>> them (in either the global or the zone)?
>>
>> when you run "dladm show-vnic"  how does it show your vnics?
>> when you run "dladm show-link" does it show the original interface and the
>> vnic as "up"
> Need those output from both the GZ and the NGZ.
> And what is the zonecfg export?
>
> John
> groenveld at acm.org
>
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>