[OpenIndiana-discuss] [developer] HBA recommended except LSI and ARECA

[Fred Liu]

> -----Original Message-----
> From: Fred Liu
> Sent: 星期二, 五月 06, 2014 12:22
> To: Zhiwen Zheng; Keith Wesolowski
> Cc: OmniOS-discuss at lists.omniti.com; Discussion list for OpenIndiana; Fred Liu;
> developer at lists.illumos.org; smartos-discuss at lists.smartos.org
> Subject: RE: [developer] HBA recommended except LSI and ARECA
> 
> 
> >From: Zhiwen Zheng [mailto:zhiwen.zh at gmail.com]
> >Sent: 星期二, 五月 06, 2014 10:09
> >To: Keith Wesolowski
> >Cc: OmniOS-discuss at lists.omniti.com; Fred Liu; Discussion list for
> OpenIndiana; Fred Liu; developer at lists.illumos.org;
> smartos-discuss at lists.smartos.org
> >Subject: Re: [developer] HBA recommended except LSI and ARECA
> 
> >Hi,
> >I get an Adaptec card several days ago, the pci id changed, after add the new
> pci id, pmcs still can not attach.
> >I checked the linux pm8001 driver,
> >it seems to access some registers, pci bar 4 address need to be shifted.
> >I am out of door now,  I think I can try to fix this several days later.
> 
> "prtconf -D" has no info about pm8001. "prtconf -vvv" will get only following
> info:
> 
>                     name='vendor-id' type=int items=1
>                         value=00009005
>                     name='device-id' type=int items=1
>                         value=00008081
>                     name='vendor-name' type=string items=1
>                         value='Adaptec'
>                     name='device-name' type=string items=1
>                         value='PMC-Sierra PM8001 SAS HBA [Series 6H]'
>                     name='subsystem-name' type=string items=1
>                         value='unknown subsystem'
> 
> And yes, pmcs doen't attach.

Any progress so far?

Thanks.

Fred