[oi-dev] flowcontrol 10Gbe intel x520‏

[Randy S]

Hallo Alasdair,

Thanks for the answer!

Will try.

Regards,


From: alasdair at lumsden.eu
To: oi-dev at openindiana.org
Date: Mon, 28 Apr 2014 11:35:04 +0000
Subject: Re: [oi-dev] flowcontrol 10Gbe intel x520‏




Hi Randy,
Your best bet is to mail the illumos mailing list - none of the illumos developers hang out on the oi-dev mailing list, this list is for distribution work (i.e. packaging etc).
To test the patch on that issue, you'd have to rebuild illumos-gate and install the resulting packages.
Cheers,
Alasdair

From: sim.ple at live.nl
To: oi-dev at openindiana.org
Date: Sat, 26 Apr 2014 23:44:48 +0200
Subject: Re: [oi-dev] flowcontrol 10Gbe intel x520‏




 I found the following issue regarding this nic.Can anyone tell me if the fix in this document has been implemented yet or what the status isIt seems to solve my problem (if it is a stable fix).If somebody could give me a short mini howto on implementing / testing this?
https://www.illumos.org/issues/4063
Regards,
RFrom: sim.ple at live.nl
To: oi-dev at openindiana.org
Date: Sat, 26 Apr 2014 12:25:35 +0200
Subject: [oi-dev] flowcontrol 10Gbe intel x520‏




Hi all,I hope this is readable .
Using an OI 151a7
I'm trying to turn off flowcontroll on an Intel X520-DA2 10Gbe nicI have put flow_control           = 0; in /kernel/drv/ixgbe.conf and also done:dladm set-linkprop -p flowctrl=no ixgbe0
results after reboot:
dladm show-ether -x ixgbe0
LINK            PTYPE    STATE    AUTO  SPEED-DUPLEX              PAUSE
ixgbe1          current  up       yes   10G-f                                  bi--                   capable  --       yes   1G-f,100M-f                     bi--                    adv      --         yes   1G-f                                      bi--              peeradv  --           no    --                                       none
==============================================================
dladm show-linkprop -p flowctrl ixgbe0
LINK         PROPERTY        PERM VALUE          DEFAULT        POSSIBLEixgbe0       flowctrl        rw   no             no             no,tx,rx,bi
===============================================================The second output seems ok, but the first puzzles me. Als the dladm command doesn't show any immediate effect, I think it doesn't work.
question on: can somebody clarify to me if flowcontrol is now turned off or not? And if not, what do I have to do to turn it off?
I know that there were issues with the ixgbe driver in OI151a7, can this have something todo with that? If this is solved in a9, how would I go about adding the a9 driver to this a7 system (if thats's possible).
Greetings, 		 	   		  

_______________________________________________
oi-dev mailing list
oi-dev at openindiana.org
http://openindiana.org/mailman/listinfo/oi-dev 		 	   		  

_______________________________________________
oi-dev mailing list
oi-dev at openindiana.org
http://openindiana.org/mailman/listinfo/oi-dev 		 	   		  

_______________________________________________
oi-dev mailing list
oi-dev at openindiana.org
http://openindiana.org/mailman/listinfo/oi-dev 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://openindiana.org/pipermail/oi-dev/attachments/20140428/9959e987/attachment-0005.html>