[OpenIndiana-discuss] Help installing to HDD

Andrew Myers am2605 at gmail.com
Sun Dec 26 00:38:29 UTC 2010


Could this be the problem?  This is highlighted in "pink" in the
device driver utility.

Not sure what I need to do though :)

==============================

Driver URL:
node name:                          pci1028,233
Vendor:                             Intel Corporation
Device:                             Mobile 82801 SATA RAID Controller
Sub-Vendor:                         Dell
binding name:                       pci1028,233
devfs path:                         /pci at 0,0/pci1028,233
pci path:                           0,1f,2
compatible name:
(pci8086,282a.1028.233.3)(pci8086,282a.1028.233)(pci1028,233)(pci8086,282a.3)(pci8086,282a)(pciclass,010400)(pciclass,0104)
driver name:                        unknown
acpi-namespace:                     _SB_.PCI0.IDE0
assigned-addresses:                 8100fa10
reg:                                fa00
compatible:                         pci8086,282a.1028.233.3
model:                              RAID controller
power-consumption:                  1
66mhz-capable:                      TRUE
fast-back-to-back:                  TRUE
devsel-speed:                       1
interrupts:                         4
max-latency:                        0
min-grant:                          0
subsystem-vendor-id:                1028
subsystem-id:                       233
unit-address:                       1f,2
class-code:                         10400
revision-id:                        3
vendor-id:                          8086
device-id:                          282a

====================================

On 26 December 2010 00:33, Andrew Myers <am2605 at gmail.com> wrote:
> Hi,
>
> I've successfully managed to boot into oi from a USB drive, and would
> like to install it to my HDD.
>
> Unfortunately, when I run the installer my hard disk is not listed.
> Also if I run GParted, the only device displaying is my USB thumb
> drive (/dev/dsk/c1t0d0p0)
>
> Any ideas what I can do in order to get my HDD to display?  Currently
> it has a 200G Windows partition (which I would like to keep) and the
> remainder formatted for Ubuntu (which I would like to replace with
> oi).
>
> Best regards,
> Andrew.
>



More information about the OpenIndiana-discuss mailing list