[OpenIndiana-discuss] OI 148 and HP Server with SmartArray 5i controller

[ken mays]

Kirill,

Only use the v2.1 driver - the v2.2 driver didn't pass testing.

~ Ken Mays

--- On Thu, 2/3/11, Kirill Ponazdyr <sink at codeangels.com> wrote:

> From: Kirill Ponazdyr <sink at codeangels.com>
> Subject: Re: [OpenIndiana-discuss] OI 148 and HP Server with SmartArray 5i controller
> To: "Discussion list for OpenIndiana" <openindiana-discuss at openindiana.org>
> Date: Thursday, February 3, 2011, 8:49 AM
> Hi Everyone!
> 
> Here is the panic stack as taken from the serial console:
> 
> http://fallout.codeangels.com/misc/cpqary3_panic.txt
> 
> This panic is not unique to one server, it happens on two
> machines.
> 
> In the meanwhile: I have installed OI on the external disk
> and replaced
> the 2.2 cpqary3 with 2.1 - Problem is gone, I can see the
> array.
> 
> Now I can manually move all the content onto array and make
> it bootable
> but this is quite a complex way to the goal :)
> 
> I also tried to use text mode installer and point it to the
> very same
> driver which works on installed OI (both .pkg and DU) but
> it always
> reports 'install failed' and does not recognize the array.
> 
> Best Regards
> 
> Kirill
> 
> 
> > On Jan 31, 2011, at 6:00 PM, Albert Lee wrote:
> >
> >> On Mon, Jan 31, 2011 at 10:16 AM, Kirill Ponazdyr
> <sink at codeangels.com>
> >> wrote:
> >>> Hi,
> >>>
> >>> I am trying to install OI build 148 on our
> DL585 G1 systems.
> >>>
> >>> They all have SmartArray 5i controller and,
> unfortunately, that
> >>> controller
> >>> causes kernel panic with the installer / life
> CD.
> >>>
> >>> Basically once you select the boot mode in the
> loader screen, the
> >>> kernel
> >>> tagline comes up for 1-2 seconds and then
> there is a quick panic /
> >>> reboot,
> >>> I cannot pause there but I saw some mentioning
> of "cpq" in the panic
> >>> text...
> >>
> >> It's probably this bug:
> >> https://www.illumos.org/issues/348
> > Nope, in that case installer should not see hard
> drives provided by cpqary
> > driver instead of kernel panic.
> >
> >> - you can confirm by booting with -vk appended to
> the kernel line
> >> which will keep the panic message visible.
> > Kirill, are you able to take a picture of the panic
> stack?
> >
> >
> > --
> > Piotr Jasiukajtis | estibi | SCA OS0072
> > http://estseg.blogspot.com
> >
> >
> > _______________________________________________
> > OpenIndiana-discuss mailing list
> > OpenIndiana-discuss at openindiana.org
> > http://openindiana.org/mailman/listinfo/openindiana-discuss
> >
> 
> 
> -- 
> Kirill Ponazdyr
> Technical Director
> Codeangels Solutions GmbH
> Tel: +41 (0)43 844 90 10
> Fax: +41 (0)43 844 90 12
> http://www.codeangels.ch
> http://www.codeangels.com
> 
> 
> _______________________________________________
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>