[OpenIndiana-discuss] Problems with attached disk chassis

[Roy Sigurd Karlsbakk]

Hi all

I just got a new disk chassis for 2,5" disks with 2+10 SSDs (two smaller ones for SLOG, the rest for L2ARC). These are attached to a SAS6 LSI controller, but I cannot see any drives. Output of scanpci is http://pastebin.com/aGKR9X32 and prtconf -D says http://pastebin.com/W6yqXRRR and then, prtconf -v says http://karlsbakk.net/prtconf-v.txt.gz

I also tried connecting the chassis to the existing SAS3 controller that indeed works (12 2TB drives connected there), but still no cigar.

Does anyone know where to start debugging this? Can it be a hardware configuration issue, or can it be software still?

Vennlige hilsener / Best regards

roy
--
Roy Sigurd Karlsbakk
(+47) 97542685
roy at karlsbakk.net
http://blogg.karlsbakk.net/
--
I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk.