[OpenIndiana-discuss] zpool create hangs

[Gabriele Bulfon]

Looks like the controller is not responding.....not even format responds once I select one of the disks...
Any problem with Adaptec 3805? I found a driver at adaptec site but it's for Solaris 10...
Should I try to replace the original one with this?
----------------------------------------------------------------------------------
Da: Gabriele Bulfon
A: Discussion list for OpenIndiana
Data: 21 luglio 2011 11.11.33 CEST
Oggetto: [OpenIndiana-discuss] zpool create hangs
Hi, I was experimenting with 5 sas disks.
Created a raidz2 pool with :
zpool create data raidz2 c8t0d0 c8t1d0 c8t2d0 c8t3d0 c8t4d0
worked.
Then destroyed it, and tried again a raidz1:
zpool create data raidz1 c8t0d0 c8t1d0 c8t2d0 c8t3d0 c8t4d0
the command did not return for 10 minutes, disks all light up, no work at all.
I killed the zpool create process, but it did not kill.
After almost 20 minutes the process was killed, and no pool was created.
Zpool status was fine, with just the original pools.
I thought that the problem was raidz1 with 5 disks, so I did the raidz2 again:
zpool create data raidz2 c8t0d0 c8t1d0 c8t2d0 c8t3d0 c8t4d0
and it's still there not returning.....
What's happening??
_______________________________________________
OpenIndiana-discuss mailing list
OpenIndiana-discuss at openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss