[OpenIndiana-discuss] 3TB disks for tank zpool? Can only use 2 TB.

Roy Sigurd Karlsbakk roy at karlsbakk.net
Tue Mar 22 18:48:05 UTC 2011


> >I just finished replacing 7x3+1(spare) 2TB drives with Hitachi 3TB
> >ones, and it works like a dream. Also, Hitachi 3TB drives have 512
> >byte sector size, >only a larger LBA (don't remember how many bits).
> 
> What release are you using, I assume as you are on this mailing list
> it could be OpenIndiana. Did you do anything special with the disks or
> did you just add them and it worked?
> 
> I am currently using opensolaris snv_134

I'm on OI 148. I didn't do anything but the standard

# zpool offline dpool c7t2d0
# cfgadm -a | grep c7t2d0
sata1/2::dsk/c7t2d0
# cfgadm -c unconfigure sata1/2
(replace drive)
# cfgadm -c configure sata1/2
# zpool replace dpool c7t2d0 c7t2d0

This is a system with three AOC-SAT2-MV8 controllers - I replaced one disk per raidz2 vdev and let that resilver (that is, resilvering one drive in each of the three VDEVs at a time).

Vennlige hilsener / Best regards

roy
--
Roy Sigurd Karlsbakk
(+47) 97542685
roy at karlsbakk.net
http://blogg.karlsbakk.net/
--
I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk.



More information about the OpenIndiana-discuss mailing list