[OpenIndiana-discuss] OCZ Deneva R Soft_Error on boot.

[Jason J. W. Williams]

Hello,

I've got a pair of OCZ Deneva R SLC SATA SSDs doing SLOG duty. They're
connected to a LSI 9211-8i dedicated to only them. Within a few minutes of
the system booting to the login prompt, each drive throws the following
message to console twice:

WARNING: /pci at 0,0/pci8086,3a40 at 1c/pci1000,3020 at 0/iport at 8
/disk at w5e83a97010004561,0 (sd42):
        Error for Command: <undecoded cmd 0x85>    Error Level: Recovered
        Requested Block: 0                         Error Block: 0
        Vendor: ATA                                Serial Number:
A117D0111450
        Sense Key: Soft_Error
        ASC: 0x0 (<vendor unique code 0x0>), ASCQ: 0x1d, FRU: 0x0

Is that something to be worried about (they're brand new) or is it an
artifact of the SATA->SAS translation in the LSI? Thank you in advance.

-J