[OpenIndiana-discuss] OCZ Deneva R Soft_Error on boot.

[James C. McPherson]

On 17/11/11 11:34 AM, Jason J. W. Williams wrote:
> Hello,
>
> I've got a pair of OCZ Deneva R SLC SATA SSDs doing SLOG duty. They're
> connected to a LSI 9211-8i dedicated to only them. Within a few minutes of
> the system booting to the login prompt, each drive throws the following
> message to console twice:
>
> WARNING: /pci at 0,0/pci8086,3a40 at 1c/pci1000,3020 at 0/iport at 8
> /disk at w5e83a97010004561,0 (sd42):
>          Error for Command:<undecoded cmd 0x85>     Error Level: Recovered
>          Requested Block: 0                         Error Block: 0
>          Vendor: ATA                                Serial Number:
> A117D0111450
>          Sense Key: Soft_Error
>          ASC: 0x0 (<vendor unique code 0x0>), ASCQ: 0x1d, FRU: 0x0
>
> Is that something to be worried about (they're brand new) or is it an
> artifact of the SATA->SAS translation in the LSI? Thank you in advance.

ASC ASCQ    Meaning
00h 1Dh     ATA PASS THROUGH INFORMATION AVAILABLE

The <undecoded cmd 0x85> is vendor-specific, so it looks
like this is an example of the hba sending a command that
the target doesn't understand.


Are there FMA events for this?

  
James C. McPherson
--
Solaris kernel software engineer, system admin and troubleshooter
               http://www.jmcp.homeunix.com/blog
Find me on LinkedIn @ http://www.linkedin.com/in/jamescmcpherson