[OpenIndiana-discuss] X11 hang on OI151a5

[Reginald Beardsley]

Here's what I got:

# echo "::interrupts -d" | mdb -k
IRQ  Vect IPL Bus    Trg Type   CPU Share APIC/INT# Driver Name(s) 
1    0x41 5   ISA    Edg Fixed  3   1     0x0/0x1   i8042#0
9    0x80 9   PCI    Lvl Fixed  1   1     0x0/0x9   acpi_wrapper_isr
12   0x42 5   ISA    Edg Fixed  0   1     0x0/0xc   i8042#0
20   0x85 9   PCI    Lvl Fixed  2   2     0x0/0x14  ohci#0, pci-ide#0
21   0x82 9   PCI    Lvl Fixed  2   2     0x0/0x15  ohci#1, nvidia#0
22   0x83 9   PCI    Lvl Fixed  3   1     0x0/0x16  ehci#0
23   0x84 9   PCI    Lvl Fixed  0   1     0x0/0x17  ehci#1
24   0x81 7   PCI    Edg MSI    1   1     -         pcieb#1
25   0x60 6   PCI    Edg MSI    1   1     -         rge#0
160  0xa0 0          Edg IPI    all 0     -         poke_cpu
208  0xd0 14         Edg IPI    all 1     -         kcpc_hw_overflow_intr
209  0xd1 14         Edg IPI    all 1     -         cbe_fire
210  0xd3 14         Edg IPI    all 1     -         cbe_fire
240  0xe0 15         Edg IPI    all 1     -         xc_serv
241  0xe1 15         Edg IPI    all 1     -         apic_error_intr

so it would appear that there are two shared interrupts rather than just one.

Clearly I'm a bit behind since I don't know a thing about mdb.  But, at least now w/ this and Alan's post I have some idea where to start.

Thanks,
Reg

--- On Tue, 12/18/12, Marion Hakanson <hakansom at ohsu.edu> wrote:

> From: Marion Hakanson <hakansom at ohsu.edu>
> Subject: Re: [OpenIndiana-discuss] X11 hang on OI151a5
> To: "Discussion list for OpenIndiana" <openindiana-discuss at openindiana.org>
> Date: Tuesday, December 18, 2012, 4:45 PM
> pulaskite at yahoo.com
> said:
> > How do you determine what interrupts the drivers use?
> > I'm seeing this:
> > "NOTICE: IRQ20 is being shared by drivers with
> different interrupt levels."
> > But I haven't found out anything more. 
> 
> echo "::interrupts -d" | mdb -k
> 
> Look for lines with more than one item in the "Driver
> Name(s)" column.
> Then you may need to become an expert as interpreting what
> "prtconf -Dv"
> prints out, in order to work out which physical device
> corresponds to
> a particular driver instance.
> 
> 
> > I'm also seeing this:
> > # svcs sendmail STATE         
> STIME    FMRI disabled   
>    15:42:19 svc:/
> > network/smtp:sendmail # tail /var/log/syslog Dec 18
> 16:28:02 openindiana
> > sendmail[941]: [ID 801593 mail.info] qBE2SeLu002299:
> to=postmaster,
> > delay=4+19:59:17, xdelay=00:00:00, mailer=relay,
> pri=41943796,
> > relay=[127.0.0.1], dsn=4.0.0, stat=Deferred: Connection
> refused by
> > [127.0.0.1]
> > 
> > which seems to have appeared when I switched to 151a5.
> 
> 
> Have a look at the /etc/mail/*.cf in your current and
> previous boot
> environment's ("beadm list" and "beadm mount" will
> help).  Maybe you
> got a different sendmail config file.  You may also
> find help by
> following the breadcrumbs in /var/svc/log/*sendmail*.log
> 
> Regards,
> 
> Marion
> 
> 
> 
> _______________________________________________
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>