[OpenIndiana-discuss] Seagate 3000GB Drive only shows 746GB
rheilke at dragonhearth.com
Fri Sep 28 18:15:27 UTC 2012
The firmware utility requires the drive to be the only HDD in the
system, and attached to a SATA port. This is a USB-attached drive (in a
SATA/USB enclosure), and the eighth HDD connected to the system. Since
it's also brand new, I don't know what the firmware would give me that
the last revision--assuming my drive has an older firmware--didn't. But
I cannot start re-jigging every HDD I have to try this.
On 9/28/2012 4:58 AM, Jonathan Adams wrote:
> have you tried the latest hard-disk firmware?
> do you know what your IO controller is?
> On 28 September 2012 12:43, Rainer Heilke <rheilke at dragonhearth.com> wrote:
>> The BIOS doesn't list any sizes, just the model numbers. :-(
>> On 9/28/2012 4:30 AM, Jonathan Adams wrote:
>> Just out of interest, what size does your BIOS think that the drive is?
Mind the Gap
More information about the OpenIndiana-discuss