[OpenIndiana-discuss] 4k zpool version no longer available?
openindiana at out-side.nl
Fri Sep 28 19:26:59 UTC 2012
Re-insert of this topic for other user.
Op 25 sep. 2012 om 21:56 heeft Jaco Schoonen <jaco at macuser.nl> het volgende geschreven:
>>>> Will try tomorrow after a reboot, can't do a reboot right now.
>>> Reboot doesn't change anything. zpool is still created with ashift=9
>>> So either the usage of sd.conf is not in 151_a5, or the VID/PID are different from what you suggested above.
>>> How can I find or read out the VID/PID that the drive is reporting?
>> The format command will show VID/PID.
> Thanks, that did the trick!
> For the archives, my format command output was:
> 4. c4d0 <ST3000DM- Z1F0NW1-0001-2.73TB>
> /pci at 0,0/pci-ide at 14,1/ide at 0/cmdk at 0,0
> 5. c4d1 <ST3000DM- Z1F0LA0-0001-2.73TB>
> /pci at 0,0/pci-ide at 14,1/ide at 0/cmdk at 1,0
> 6. c5t0d0 <ST3000DM-001-9YN166-CC4H-2.73TB>
> /pci at 0,0/pci103c,1609 at 12,2/storage at 1/disk at 0,0
> Adding this to /kernel/drv/sd.conf:
> sd-config-list = "ST3000DM","physical-block-size:4096";
> and doing a full reboot (thanks to Jim for the -p hint)
> Then zpool created a zpool with ashift=12
>> Did you check the boot messages in /var/adm/messages for clues?
> Confusingly it reported Vendor "Gen-ATA" in /var/adm/messages:
> [ID 243001 kern.info] Disk1: <Vendor 'Gen-ATA ' Product 'ST3000DM001-9YN1'>
> but using "Gen-ATA" in sd.conf did not work.
>> Though not suitable for the casual admin, you can see the sd driver's assigned
>> values by looking at the values with mdb:
>> echo ::sd_state | mdb -k
>> and look for un_phy_blocksize
> That confirmed that the ST3000DM001 is lying about it's physical block size (0x200 -> 512 bytes).
> Thanks again!
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
More information about the OpenIndiana-discuss