[OpenIndiana-discuss] OI on HP ProLiant Microserver Gen8

[Svavar Örn Eysteinsson]

What about :

set apix:apic_timer_preferred_mode=0x0

?



On 25.7.2013, at 07:14, Jarrad Piper wrote:

> Yep I've tried the workaround, it still freezes and locks up the system.
> 
> 
> On Thu, Jul 25, 2013 at 3:19 PM, Marcel Telka <marcel at telka.sk> wrote:
> 
>> On Thu, Jul 25, 2013 at 11:27:54AM +0930, Jarrad Piper wrote:
>>> I've just received my Gen8 Microserver (G2020 model). Unfortunately the
>>> NIC's are not detected in OI's installer. It looks like it uses a
>> Broadcom
>>> 5720 chip which is not supported. I have tried to use the latest Broadcom
>>> drivers for Solaris 11 but the NIC's are still not detected. For now I
>> have
>>> popped in an older Broadcom Dual Port NIC. Also of note is that KVM
>> freezes
>>> when booting a VM with this CPU (even with the suggested fix in the OI
>> KVM
>>> Wiki).
>> 
>> Did you tried this?
>> 
>> #--- workaround for Bug #1723
>> echo "set apix_enable=0" >> /etc/system
>> 
>> --
>> +-------------------------------------------+
>> | Marcel Telka   e-mail:   marcel at telka.sk  |
>> |                homepage: http://telka.sk/ |
>> |                jabber:   marcel at jabber.sk |
>> +-------------------------------------------+
>> 
>> _______________________________________________
>> OpenIndiana-discuss mailing list
>> OpenIndiana-discuss at openindiana.org
>> http://openindiana.org/mailman/listinfo/openindiana-discuss
>> 
> _______________________________________________
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss