[OpenIndiana-discuss] Using cfgadm to switch harddisk LEDs / 2nd try

[Stefan Müller-Wilken]

[anyone an idea why Ctrl-V sometimes directly sends mails instead of
 pasting text in Outlook? :-P )

Dear all,

I'm still struggling with using cfgadm to controll my T3-1 and
DL380's SAS harddisk locator and fault LEDs. Coming back to my
previous post, this is where I stand with my T3-1:


# cfgadm -la
Ap_Id                          Type         Receptacle   Occupant     Condition
c2                             scsi-sas     connected    configured   unknown
c2::dsk/c2t6d0                 CD-ROM       connected    configured   unknown
c4                             scsi-sas     connected    configured   unknown
c4::w5000cca00a34873d,0        disk-path    connected    configured   unknown
c5                             scsi-sas     connected    configured   unknown
c5::w5000c5005f6fbadd,0        disk-path    connected    configured   unknown
c6                             scsi-sas     connected    configured   unknown
c6::w5000cca00a49aacd,0        disk-path    connected    configured   unknown
c7                             scsi-sas     connected    configured   unknown
c7::w5000cca00a372291,0        disk-path    connected    configured   unknown
c8                             scsi-sas     connected    unconfigured unknown
c9                             scsi-sas     connected    configured   unknown
c9::w5000cca00a372421,0        disk-path    connected    configured   unknown
c10                            scsi-sas     connected    configured   unknown
c10::w5000cca00a4909c5,0       disk-path    connected    configured   unknown
c11                            scsi-sas     connected    configured   unknown
c11::w5000cca00a49bdad,0       disk-path    connected    configured   unknown
c12                            scsi-sas     connected    configured   unknown
c12::w5000cca00a46586d,0       disk-path    connected    configured   unknown
c13                            scsi-sas     connected    unconfigured unknown
c14                            scsi-bus     connected    unconfigured unknown
...

# cfgadm -x locator c4::w5000cca00a34873d,0
cfgadm: Hardware specific failure: unavailable
#

Same situation with my DL380 server, so the question is: How is that supposed to work on the T3-1? How on other SAS controllers? Peter recently said that he would  successfully control the LEDs on his T3-x servers so it must be possible somehow...

Cheers
 Stefan

________________________________
Acando GmbH, Millerntorplatz 1, 20359 Hamburg, Germany | Geschäftsführer: Guido Ahle | Amtsgericht Hamburg, HRB 76048 | Ust.Ident-Nr.:DE208833022