[OpenIndiana-discuss] (no subject) IP Configuration

[Jim Klimov]

On 2013-11-27 02:00, Rainer Heilke wrote:
> This is what I would expect with NWAM disabled. But I explicitly do
> *not* want to use NWAM.
>
> As a side note, network/physical:default _does_ bring up my secondary
> interface e1000g1, which will be used for my two SunRays. e1000g0 is
> supposed to be 192.168.0.1, while e1000g1 comes up correctly as
> 192.168.1.6.

Okay... and what does NOT work ("supposed to" means problems?)
Is e1000g0 configured in the same manner as e1000g1?
Are you certain it is named e1000g0 indeed (things do get funny
sometimes)?

I.e. do both NICs show up here?:

# dladm show-phys
LINK         MEDIA                STATE      SPEED  DUPLEX    DEVICE
e1000g0      Ethernet             up         1000   full      e1000g0
e1000g1      Ethernet             up         1000   full      e1000g1

Just in case, does "devfsadm -Cv" reconfigure any device nodes?

//Jim