[OpenIndiana-discuss] (no subject) IP Configuration

[Rainer Heilke]

On 11/26/2013 5:22 PM, Jim Klimov wrote:
> On 2013-11-27 02:00, Rainer Heilke wrote:
>> This is what I would expect with NWAM disabled. But I explicitly do
>> *not* want to use NWAM.
>>
>> As a side note, network/physical:default _does_ bring up my secondary
>> interface e1000g1, which will be used for my two SunRays. e1000g0 is
>> supposed to be 192.168.0.1, while e1000g1 comes up correctly as
>> 192.168.1.6.
>
> Okay... and what does NOT work ("supposed to" means problems?)
e1000g0 is not brought up with an IP address/netmask on boot-up.
> Is e1000g0 configured in the same manner as e1000g1?
Yes. In fact, I backed up my previous network config files, and when the 
manual way didn't work, I cp -p 'd the originals into /etc. These files 
had been working properly since 151a1.
> Are you certain it is named e1000g0 indeed (things do get funny
> sometimes)?
I've double-checked this several times (and see above).
>
> I.e. do both NICs show up here?:
>
> # dladm show-phys
> LINK         MEDIA                STATE      SPEED  DUPLEX DEVICE
> e1000g0      Ethernet             up         1000   full e1000g0
> e1000g1      Ethernet             up         1000   full e1000g1
Yes.
>
> Just in case, does "devfsadm -Cv" reconfigure any device nodes?
No. It actually cleans up some USB and a bunch of dsk and rdsk nodes.

Rainer
>
> //Jim
>
>
> _______________________________________________
> OpenIndiana-discuss mailing list
> OpenIndiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss
>

-- 
Mind the Gap
Web: http://www.dragonhearth.com