[OpenIndiana-discuss] ZFS replacement problem

[Michelle Knight]

Thanks Andreas,

Good suggestion, however, it didn't work...

mich at jaguar:~# zpool replace -f tank c3t4d0s1  c3t0d0
cannot replace c3t4d0s1 with c3t0d0: no such device in pool

I have also tried exporting and importing the pool, as suggested in
other forums.

Michelle.

On Tue, 3 Jun 2014 21:01:49 +0200
Andreas Wacknitz <a.wacknitz at gmx.de> wrote:

> Michelle,
> 
> Am 03.06.2014 um 20:39 schrieb Michelle Knight
> <michelle at msknight.com>:
> 
> > H Folks,
> > 
> > I've got the following...
> > 
> > mich at jaguar:~# cfgadm -al
> > Ap_Id                          Type         Receptacle   Occupant
> > Condition sata0/0::dsk/c3t0d0            disk         connected
> > configured   ok sata0/1                        sata-port
> > empty        unconfigured ok sata0/2::dsk/c3t2d0
> > disk         connected    configured   ok
> > sata0/3::dsk/c3t3d0            disk         connected    configured
> > ok sata0/4::dsk/c3t4d0            disk         connected
> > configured   ok sata0/5::dsk/c3t5d0            disk
> > connected    configured   ok
> > 
> > mich at jaguar:~# zpool status
> >  pool: rpool1
> > state: ONLINE
> >  scan: none requested
> > config:
> > 
> >        NAME        STATE     READ WRITE CKSUM
> >        rpool1      ONLINE       0     0     0
> >          c3t5d0s0  ONLINE       0     0     0
> > 
> > errors: No known data errors
> > 
> >  pool: tank
> > state: ONLINE
> >  scan: resilvered 1.70M in 0h0m with 0 errors on Tue Jun  3 18:19:48
> >  2014 config:
> > 
> >        NAME          STATE     READ WRITE CKSUM
> >        tank          ONLINE       0     0     0
> >          raidz1-0    ONLINE       0     0     0
> >            c3t4d0s1  ONLINE       0     0     0
> >            c3t2d0s1  ONLINE       0     0     0
> >            c3t3d0s1  ONLINE       0     0     0
> > 
> Your zpool „tank“ consists of sliced disks (note the s1 at the end of
> the device names)! This is uncommon (only the disk that the system is
> booted from needs to have a slice because grub needs it).
> 
> > errors: No known data errors
> > 
> > 
> > I try ... 
> > 
> > mich at jaguar:~# zpool replace -f tank c3t4d0  c3t0d0
> > cannot replace c3t4d0 with c3t0d0: no such device in pool
> > 
> > ... which is what I am reading in countless articles on-line to do,
> > but it isn't working. I don't know why I'm getting this error, or
> > which of the two it is complaining about, because if I try...
> > 
> > mich at jaguar:~# zpool offline tank c3t4d0
> > cannot offline c3t4d0: no such device in pool
> > 
> The error message is correct. You have c3t4d0s1 in your zpool, not
> c3t4d0! When you created your „tank“ zpool you have been using sliced
> disks, this is unneeded but possible…
> 
> 
> > So I can't get the drive replaced.
> > 
> I am not that experienced with it but I guess you could issue
> zpool replace tank c3t4d0s1 c3t0d0
> (using the whole unsliced disk c3t0d0).
> 
> Regards,
> Andreas
> 
> > Any help gratefully appreciated.
> > 
> > Michelle
> > 
> > _______________________________________________
> > openindiana-discuss mailing list
> > openindiana-discuss at openindiana.org
> > http://openindiana.org/mailman/listinfo/openindiana-discuss
> 
> 
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> http://openindiana.org/mailman/listinfo/openindiana-discuss