[OpenIndiana-discuss] wiki.openindiana.org is unavailable?? Temporary or permanent, gone, ceased??
Aurélien Larcher
aurelien.larcher at gmail.com
Tue Sep 20 16:39:19 UTC 2016
On Tue, Sep 20, 2016 at 6:36 PM, Hans J Albertsson
<hans.j.albertsson at gmail.com> wrote:
> The new disk is 4k blocks, the Old is 512b blocks.
Yes that was it. But if block size was not a problem, for the second
point could you not reimport the pool under the original name as done
usually?
>
> Hans J. Albertsson
> From my Nexus 5
>
> Den 20 sep. 2016 18:34 skrev "Aurélien Larcher" <aurelien.larcher at gmail.com
>>:
>
>> On Tue, Sep 20, 2016 at 6:19 PM, Hans J Albertsson
>> <hans.j.albertsson at gmail.com> wrote:
>> > Split requires that the new disk can be a mirror in the old root pool.
>> And
>> > a new zpool.
>> > Neither condition is met in my case.
>>
>> Ah OK sorry. Just curious, what makes it impossible?
>>
>> >
>> > Hans J. Albertsson
>> > From my Nexus 5
>> >
>> > Den 20 sep. 2016 15:55 skrev "Aurélien Larcher" <
>> aurelien.larcher at gmail.com
>> >>:
>> >
>> >> But I would personally use the root split method over the old one.
>> >>
>> >> On Tue, Sep 20, 2016 at 3:10 PM, Мартин Бохниг via openindiana-discuss
>> >> <openindiana-discuss at openindiana.org> wrote:
>> >> > Hello,
>> >> >
>> >> > I have no login credentials nor anything else other than ML access
>> (and
>> >> never needed it nor asked for).
>> >> > But here is some info you may find useful:
>> >> >
>> >> > A) As always in all periods/epochs/ages, I took wget copies of all
>> >> important sites.
>> >> > So if anybody ever needs any mailing list copy, bugs database or
>> >> download central stuff from opensolaris.org, schillix, belenix,
>> >> opensparc.net, or oi or illumos etc, I can help you in most cases
>> >> >
>> >> > B) It took me 10 to 15 seconds from your question to google to finding
>> >> the links you are referring to (down atm) to google cache.
>> >> > The content a few lines lower ...
>> >> >
>> >> > C) While not most but definitely at lot of most lightweight stuff
>> should
>> >> always make it into webarchive.org.
>> >> >
>> >> >
>> >> > Now your requested content:
>> >> >
>> >> >
>> >> > MfG, %martin
>> >> >
>> >> >
>> >> > How to migrate the root pool
>> >> > Skip to end of metadata
>> >> > * Page restrictions apply
>> >> > * Added by Gary Mills , last edited by Predrag Zečević on Dec 05,
>> >> 2013 ( view change ) Go to start of metadata
>> >> > *
>> >> > I recently wanted to migrate the root pool to a new device. This
>> turned
>> >> out to be easy to do, using extisting facilities. The original root
>> pool
>> >> was on an old 80-gig disk. This system also had a data pool on a newer
>> 1
>> >> TB disk. Here's what the `format' command showed for them:
>> >> > 0. c2t0d0 <Unknown-Unknown-0001 cyl 9726 alt 2 hd 255 sec 63>
>> >> > /pci at 0,0/pci1043,8389 at 11/disk at 0,0
>> >> > 1. c2t2d0 <ATA-ST31000524AS-JC4B-931.51GB>
>> >> > /pci at 0,0/pci1043,8389 at 11/disk at 2,0I
>> >> > * wanted to migrate the root pool to a new SSD. The `format' command
>> >> was available to prepare the SSD. I could use the `zpool' command to
>> >> create the pool on that new device, and `beadm' and `installgrub' to
>> >> perform the migration. That part worked out nicely. I had to use a
>> >> variety of commands to complete the migration.
>> >> > * Add the SSD: Just shut down the computer, install the SSD hardware,
>> >> and boot the system. Here's the new output from `format':
>> >> > 0. c2t0d0 <Unknown-Unknown-0001 cyl 9726 alt 2 hd 255 sec 63>
>> >> > /pci at 0,0/pci1043,8389 at 11/disk at 0,0
>> >> > 1. c2t1d0 <ATA-SanDiskSDSSDP06-0 cyl 9966 alt 2 hd 224 sec 56>
>> >> > /pci at 0,0/pci1043,8389 at 11/disk at 1,0
>> >> > 2. c2t2d0 <ATA-ST31000524AS-JC4B-931.51GB>
>> >> > /pci at 0,0/pci1043,8389 at 11/disk at 2,0
>> >> > * Prepare the SSD: Create the fdisk partition within `format':
>> >> > format> fdisk
>> >> > No fdisk table exists. The default partition for the disk is:
>> >> > a 100% "SOLARIS System" partition
>> >> > Type "y" to accept the default partition, otherwise type "n" to
>> >> edit the
>> >> > partition table.
>> >> > y
>> >> >
>> >> > * Create the slice:
>> >> > partition> 0
>> >> > Part Tag Flag Cylinders Size Blocks
>> >> > 0 unassigned wm 0 0 (0/0/0)
>> >> 0
>> >> > Enter partition id tag[unassigned]: root
>> >> > Enter partition permission flags[wm]:
>> >> > Enter new starting cyl[1]: 3
>> >> > Enter partition size[0b, 0c, 3e, 0.00mb, 0.00gb]: $
>> >> > partition> p
>> >> > Current partition table (unnamed):
>> >> > Total disk cylinders available: 9965 + 2 (reserved cylinders)
>> >> > Part Tag Flag Cylinders Size Blocks
>> >> > 0 root wm 3 - 9964 59.59GB (9962/0/0)
>> >> 124963328
>> >> > 1 unassigned wm 0 0 (0/0/0)
>> >> 0
>> >> > 2 backup wu 0 - 9964 59.61GB (9965/0/0)
>> >> 125000960
>> >> > 3 unassigned wm 0 0 (0/0/0)
>> >> 0
>> >> > 4 unassigned wm 0 0 (0/0/0)
>> >> 0
>> >> > 5 unassigned wm 0 0 (0/0/0)
>> >> 0
>> >> > 6 unassigned wm 0 0 (0/0/0)
>> >> 0
>> >> > 7 unassigned wm 0 0 (0/0/0)
>> >> 0
>> >> > 8 boot wu 0 - 0 6.12MB (1/0/0)
>> >> 12544
>> >> > 9 unassigned wm 0 0 (0/0/0)
>> >> 0
>> >> > partition> l
>> >> > Ready to label disk, continue? y
>> >> > * Get the root pool version:
>> >> > # zpool get all rpool
>> >> > NAME PROPERTY VALUE SOURCE
>> >> > rpool size 74G -
>> >> > ...
>> >> > rpool version 28 local
>> >> >
>> >> > * Try to create the new root pool, with a new pool name:
>> >> > # zpool create -o version=28 rpool1 c2t1d0s0
>> >> > invalid vdev specification
>> >> > use '-f' to override the following errors:
>> >> > /dev/dsk/c2t1d0s0 overlaps with /dev/dsk/c2t1d0s2
>> >> >
>> >> > * Try again with the force option:
>> >> > # zpool create -f -o version=28 rpool1 c2t1d0s0
>> >> > # zpool list
>> >> > NAME SIZE ALLOC FREE EXPANDSZ CAP DEDUP HEALTH
>> ALTROOT
>> >> > dpool 928G 85.6G 842G 2.50M 9% 1.00x ONLINE -
>> >> > rpool 74G 7.05G 66.9G - 9% 1.00x ONLINE -
>> >> > rpool1 59.5G 108K 59.5G - 0% 1.00x ONLINE -
>> >> >
>> >> > * Create the BE, on the new device with a new name:
>> >> > # beadm create -p rpool1 oi_151a6x
>> >> > WARNING: menu.lst file /rpool1/boot/grub/menu.lst does not exist,
>> >> > generating a new menu.lst file
>> >> > Created successfully
>> >> >
>> >> > * Verify that it exists:
>> >> > # beadm list
>> >> > BE Active Mountpoint Space Policy Created
>> >> > oi_151a6 NR / 5.98G static 2012-09-13 16:33
>> >> > oi_151a6x R - 4.15G static 2013-06-06 15:55
>> >> > openindiana - - 13.5M static 2012-09-13 08:55
>> >> >
>> >> > * Install the boot blocks:
>> >> > # installgrub -m /boot/grub/stage1 /boot/grub/stage2
>> >> /dev/rdsk/c2t1d0s0
>> >> > Updating master boot sector destroys existing boot managers (if
>> any).
>> >> > continue (y/n)?y
>> >> > stage2 written to partition 0, 277 sectors starting at 50 (abs
>> 12594)
>> >> > stage1 written to partition 0 sector 0 (abs 12544)
>> >> > stage1 written to master boot sector
>> >> >
>> >> > * Change the BIOS boot order by shutting the system down and entering
>> >> the BIOS setup. Then put the SSD first in the boot order and reboot.
>> >> > * At this point, I upgraded to oi_151a7. This confirmed that the new
>> >> root pool was functional. Here's the initial boot environment:
>> >> > # beadm list
>> >> > BE Active Mountpoint Space Policy Created
>> >> > oi_151a6 R - 6.01G static 2012-09-13 16:33
>> >> > oi_151a6x NR / 4.33G static 2013-06-06 15:55
>> >> > openindiana - - 13.5M static 2012-09-13 08:55
>> >> >
>> >> > * Upgrade:
>> >> > # pkg image-update --be-name oi_151a7
>> >> > WARNING: The boot environment being modified is not the active
>> one.
>> >> Changes made in the active BE will not be reflected on the next boot.
>> >> > Packages to update: 895
>> >> > Create boot environment: Yes
>> >> > Create backup boot environment: No
>> >> > ...
>> >> > A clone of oi_151a6x exists and has been updated and activated.
>> >> > On the next boot the Boot Environment oi_151a7 will be
>> >> > mounted on '/'. Reboot when ready to switch to this updated BE.
>> >> >
>> >> > * Check the BEs again:
>> >> > # beadm list
>> >> > BE Active Mountpoint Space Policy Created
>> >> > oi_151a6 R - 6.01G static 2012-09-13 16:33
>> >> > oi_151a6x N / 101K static 2013-06-06 15:55
>> >> > oi_151a7 R - 5.31G static 2013-06-06 16:56
>> >> > openindiana - - 13.5M static 2012-09-13 08:55
>> >> >
>> >> > * Shut down OS:
>> >> > # init 5
>> >> > updating //platform/i86pc/boot_archive
>> >> > updating //platform/i86pc/amd64/boot_archive
>> >> >
>> >> > * Press the `Power' button to reboot. Confirm that the upgrade was
>> >> successful. Notice that there are still two active boot environments:
>> >> > $ beadm list
>> >> > BE Active Mountpoint Space Policy Created
>> >> > oi_151a6 R - 6.01G static 2012-09-13 16:33
>> >> > oi_151a6x - - 16.8M static 2013-06-06 15:55
>> >> > oi_151a7 NR / 5.33G static 2013-06-06 16:56
>> >> > openindiana - - 13.5M static 2012-09-13 08:55
>> >> >
>> >> > * Some of the old root pool is still in use. My home directory was
>> on
>> >> rpool/export/home/mills . To simplify this migration, I decided to
>> move it
>> >> to the data pool. First, create new filesystems on the data pool:
>> >> > # zfs create dpool/export
>> >> > # zfs create dpool/export/home
>> >> >
>> >> > * My home directory in the /etc/passwd file was automounted to
>> >> /home/mills from /export/home/mills . The first thing I did was to
>> copy it
>> >> to /dpool/export/home/mills using `cpio'. Then I edited /etc/passwd to
>> >> change my home directory to /dpool/export/home/mills . After that
>> change,
>> >> it was no longer automounted. After a reboot, I confirmed that the old
>> >> root pool was no longer needed for my home directory:
>> >> > # zfs unmount rpool/export/home/mills
>> >> > # zfs unmount rpool/export/home
>> >> > # zfs unmount rpool/export
>> >> >
>> >> > * Still, there are a few pieces left:
>> >> > # zfs list | egrep 'dump|swap'
>> >> > rpool/dump 895M 65.5G 895M -
>> >> > rpool/swap 952M 65.8G 637M -
>> >> >
>> >> > * To move the dump device, first get the properties of the old one:
>> >> > $ zfs get all rpool/dump | egrep 'SOURCE|local'
>> >> > NAME PROPERTY VALUE
>> >> SOURCE
>> >> > rpool/dump volsize 895M
>> >> local
>> >> > rpool/dump checksum off
>> >> local
>> >> > rpool/dump compression off
>> >> local
>> >> > rpool/dump refreservation none
>> >> local
>> >> > rpool/dump dedup off
>> >> local
>> >> >
>> >> > * Create another one on rpool1:
>> >> > # zfs create -o checksum=off -o compression=off -o
>> >> refreservation=none -o dedup=off -V 895M rpool1/dump
>> >> >
>> >> > * Try to move it:
>> >> > # dumpadm -d /dev/zvol/dsk/rpool1/dump
>> >> > dumpadm: dump device /dev/zvol/dsk/rpool1/dump is too small to
>> hold
>> >> a system dump
>> >> > dump size 1812297728 bytes, device size 938475520 bytes
>> >> > # dumpadm
>> >> > Dump content: kernel pages
>> >> > Dump device: /dev/zvol/dsk/rpool/dump (dedicated)
>> >> > Savecore directory: /var/crash/ati
>> >> > Savecore enabled: no
>> >> > Save compressed: on
>> >> >
>> >> > * Expand the volume and try again:
>> >> > # dumpadm -d /dev/zvol/dsk/rpool1/dump
>> >> > Dump content: kernel pages
>> >> > Dump device: /dev/zvol/dsk/rpool1/dump (dedicated)
>> >> > Savecore directory: /var/crash/ati
>> >> > Savecore enabled: no
>> >> > Save compressed: on
>> >> > * Now, get the properties of the old swap device:
>> >> > $ zfs get all rpool/swap | egrep 'SOURCE|local'
>> >> > NAME PROPERTY VALUE
>> >> SOURCE
>> >> > rpool/swap volsize 895M
>> >> local
>> >> > rpool/swap refreservation 952M
>> >> local
>> >> >
>> >> > * Create a new one on rpool1:
>> >> > # zfs create -o refreservation=952M -V 895M rpool1/swap
>> >> >
>> >> > * Move the swap device by editing /etc/vfstab:
>> >> > o Move the swap device by editing /etc/vfstab:
>> >> > root at ati:/etc# cp -p vfstab vfstab-
>> >> > root at ati:/etc# ex vfstab
>> >> > root at ati:/etc# diff vfstab- vfstab
>> >> > 12c12
>> >> > < /dev/zvol/dsk/rpool/swap - - swap
>> >> - no -
>> >> > ---
>> >> > > /dev/zvol/dsk/rpool1/swap - - swap
>> >> - no -
>> >> >
>> >> > * Reboot and confirm that rpool is no longer used:
>> >> > # dumpadm
>> >> > Dump content: kernel pages
>> >> > Dump device: /dev/zvol/dsk/rpool1/dump (dedicated)
>> >> > Savecore directory: /var/crash/ati
>> >> > Savecore enabled: no
>> >> > Save compressed: on
>> >> > # swap -l
>> >> > swapfile dev swaplo blocks free
>> >> > /dev/zvol/dsk/rpool1/swap 96,2 8 1832952 1832952
>> >> > # beadm list
>> >> BE
>> >> > Active Mountpoint Space Policy Created
>> >> > oi_151a6 R - 6.01G static 2012-09-13 16:33
>> >> > oi_151a6x - - 16.8M static 2013-06-06 15:55
>> >> > oi_151a7 NR / 5.34G static 2013-06-06 16:56
>> >> > openindiana - - 13.5M static 2012-09-13 08:55
>> >> > # zpool list
>> >> > NAME SIZE ALLOC FREE EXPANDSZ CAP DEDUP HEALTH
>> ALTROOT
>> >> > dpool 928G 85.6G 842G 2.50M 9% 1.00x ONLINE -
>> >> > rpool 74G 6.19G 67.8G - 8% 1.00x ONLINE -
>> >> > rpool1 59.5G 7.17G 52.3G - 12% 1.00x ONLINE -
>> >> >
>> >> > * Export the pool and observe the result:
>> >> > # zpool export rpool
>> >> > # zpool list
>> >> > NAME SIZE ALLOC FREE EXPANDSZ CAP DEDUP HEALTH
>> ALTROOT
>> >> > dpool 928G 85.6G 842G 2.50M 9% 1.00x ONLINE -
>> >> > rpool1 59.5G 7.18G 52.3G - 12% 1.00x ONLINE -
>> >> > # zfs list
>> >> > NAME USED AVAIL REFER MOUNTPOINT
>> >> > dpool 85.6G 828G 24K /dpool
>> >> > dpool/export 83.8G 828G 22K /dpool/export
>> >> > dpool/export/home 83.8G 828G 83.8G /dpool/export/home
>> >> > dpool/opt 1.82G 828G 1.82G /dpool/opt
>> >> > dpool/opt/local 21K 828G 21K /dpool/opt/local
>> >> > rpool1 8.10G 50.5G 36.5K /rpool1
>> >> > rpool1/ROOT 5.17G 50.5G 31K legacy
>> >> > rpool1/ROOT/oi_151a6x 16.8M 50.5G 4.33G /
>> >> > rpool1/ROOT/oi_151a7 5.16G 50.5G 4.27G /
>> >> > rpool1/dump 2.00G 50.5G 2.00G -
>> >> > rpool1/swap 952M 51.4G 16K -
>> >> > # getent passwd mills
>> >> > mills:x:107:10:Gary Mills:/dpool/export/home/mills:/bin/ksh
>> >> > # beadm list
>> >> > BE Active Mountpoint Space Policy Created
>> >> > oi_151a6x - - 16.8M static 2013-06-06 15:55
>> >> > oi_151a7 NR / 5.34G static 2013-06-06 16:56
>> >> >
>> >> > * I could have resumed automounting my home directory by changing the
>> >> mount point of dpool/export to /export, but I decided to leave it the
>> way
>> >> it was.
>> >> > * Here's another upgrade, just to confirm that the new root pool was
>> >> correct:
>> >> > # pkg image-update --be-name oi_151a8
>> >> > Packages to remove: 16
>> >> > Packages to install: 6
>> >> > Packages to update: 879
>> >> > Create boot environment: Yes
>> >> > Create backup boot environment: No
>> >> > DOWNLOAD PKGS FILES XFER
>> >> (MB)
>> >> > Completed 901/901 22745/22745
>> >> 566.2/566.2
>> >> > PHASE ACTIONS
>> >> > Removal Phase 13844/13844
>> >> > Install Phase 12382/12382
>> >> > Update Phase 23637/23637
>> >> > PHASE ITEMS
>> >> > Package State Update Phase 1780/1780
>> >> > Package Cache Update Phase 895/895
>> >> > Image State Update Phase 2/2
>> >> > ...
>> >> > root at ati:~# beadm list
>> >> > BE Active Mountpoint Space Policy Created
>> >> > oi_151a6x - - 16.8M static 2013-06-06 15:55
>> >> > oi_151a7 N / 11.4M static 2013-06-06 16:56
>> >> > oi_151a8 R - 8.76G static 2013-08-11 16:12
>> >> > # bootadm list-menu
>> >> > the location for the active GRUB menu is:
>> /rpool1/boot/grub/menu.lst
>> >> > default 2
>> >> > timeout 30
>> >> > 0 oi_151a6x
>> >> > 1 oi_151a7
>> >> > 2 oi_151a8
>> >> > # init 5
>> >> >
>> >> > * Press the power switch to reboot. The upgrade was successful,
>> >> completing the migration to a new device.
>> >> >
>> >> > Labels:
>> >> > None Edit Labels
>> >> > 3 Comments
>> >> > Hide/Show Comments
>> >> > *
>> >> > Dec 06, 2013
>> >> > Predrag Zečević
>> >> > Hi,
>> >> > I have also wanted to try SSD (Samsung SSD 840, 120 GB). My current
>> >> rpool was on 160 GB HD 7200RPM. I have used slightly different approach,
>> >> which worked (I am now writing this from system booted from SSD).
>> >> > First, I have created same partition layout as existing rpool had
>> >> (slices 0, 2 and 8 - similar like in this example). BTW, I have attached
>> >> SSD disk via USB docking station...
>> >> > Then I have created new pool (I have found disk ID using format and
>> >> fdisk utilities in steps mentioned at the beginning of this page):
>> >> >
>> >> > Next phase is to take recursive snapshot of rpool and to send
>> (verbose=
>> >> -v , recursive= -R ) it to and receive it (keep structure= -d , force=
>> -F
>> >> ) to new rpool (I have named it RPOOL):
>> >> >
>> >> > BTW, my installation has user home directories on second HD, as well
>> as
>> >> /opt directory. Boot disk ( rpool in such environment) has occupied
>> 26 GB
>> >> of space and system took 28 minutes under normal activities to
>> send/receive
>> >> pool...
>> >> > Now, we need to make new disk bootable. Check (compare and set bootfs
>> >> property of new root pool):
>> >> >
>> >> > After this, new pool has to be exported and grub installed:
>> >> >
>> >> > Now, you can shutdown system and shuffle disks. If you have put SSD
>> disk
>> >> to same controller, nothing to do... But, if you have changed location
>> of
>> >> it, then you have to fix BIOS boot order.
>> >> > I found easy enough to boot system FIRST from latest /hipster USB text
>> >> installation image (less than 1GG, easy to create - and my installation
>> IS
>> >> /hipster one) in order to import copy of rpool under new name:
>> >> >
>> >> > After you have started reboot, skip step of booting from removable
>> >> device and your system should be started from SSD now.
>> >> > My impression is that all this is NOT enough to have all benefits of
>> SSD
>> >> disk usage...
>> >> > Actually, I could not say that systems is significantly faster than
>> boot
>> >> from normal HD, but it might be needed to do some optimizations.
>> >> > This is how I did moved rpool to SSD (pardon me on my mistakes in
>> >> English).
>> >> > Regards.
>> >> > P.S. Resources used (beside this page):
>> >> > * http://ptribble.blogspot.de/2012/09/recursive-zfs-send-
>> >> and-receive.html
>> >> > * http://waddles.org/content/replicating-zfs-root-disks
>> >> >
>> >> > * Permalink
>> >> > *
>> >> > Nov 15, 2014
>> >> > Jon Strabala
>> >> > Predrag
>> >> > You might be able to do this via "zpool split" without using
>> snapshots (
>> >> I have not tried all these spteps ... yet )
>> >> > Lets's assume
>> >> > * you have a rpool that is a bare drive or a mirrored set with the
>> >> drive or one of the members "c1t0d0s0"
>> >> > * you want to migrate the root pool to a new disk (same size or maybe
>> >> bigger) to a new disk "c1t2d0s0"
>> >> > * Note I'm not sure about any issues that might be caused via a 512
>> >> byte vs 4K disk sector mismatch
>> >> > so lets assume the sector sizes match on all the disks (old and new) .
>> >> > Note "zpool split" is not documented in in the illumos man page Bug
>> #2897
>> >> > Step 1 - I imaging a "cleaner procedure' with out relying on
>> snapshots
>> >> might be doing something like the following:
>> >> > # zpool attach rpool c1t0d0s0 c1t2d0s0
>> >> > # zpool status rpool
>> >> > *** wait for resilver to complete ****
>> >> > Step 2 - Now split off the new device it's a perfect clone (by default
>> >> it takes the last one added - but we could specify c1t2d0s0 as the last
>> >> arg )
>> >> > # zpool split rpool rpool2
>> >> > # installgrub /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c1t2d0s0
>> >> > [Optional] You have your clone albiet with a different pool name,
>> >> however what if your new drive is larger - your not using the space -
>> but
>> >> you can
>> >> > # zfs list
>> >> > # zpool set autoexpand=on rpool2
>> >> > [Optional] not done yet look at how much space you can expand and use
>> >> and then use your new space
>> >> > # zpool get expandsize rpool2
>> >> > # zpool online -e rpool2
>> >> > # zfs list
>> >> > # zpool set autoexpand=off rpool2
>> >> > [Optional] at this point the new cloned disk may be bigger than the
>> >> disks you cloned from if so no more using those old disks later as part
>> of
>> >> a mirror with the new disk
>> >> > Step 3. Time to set up the cloned disk to boot (we need to change it's
>> >> pool name ) so shut down and power off
>> >> > # init 0
>> >> > Step 4. Remove the old OS drive (or drives) which is either the
>> original
>> >> stand alone disk or the entire original mirror set .
>> >> > Step 5. Boot from the latest /hipster USB text image - only way I
>> know
>> >> of to change the pool name back to 'rpool'
>> >> > Step 6. Now import the device and change its name from rpool2 to rpool
>> >> > # zpool import -f rpool2 rpool
>> >> > # init 6
>> >> > IMHO Step 1 & 2 make a perfect clone except for the pool name - it
>> would
>> >> be cool if there was a zpool command to rename the split e.g. rpool2 to
>> >> rpool WITHOUT bringing it online as it would have a "name" conflict and
>> >> then you remove it offsite as a hot spare OS clone backup without
>> rebooting
>> >> to a /hipster image to rename it.
>> >> >
>> >> > * Permalink
>> >> > *
>> >> > Sep 03, 2014
>> >> > Stefan Müller-Wilken
>> >> > Procedure for SPARC (as reported by igork on #oi-dev): need install
>> zfs
>> >> boot block by: installboot -F zfs /usr/platform/`uname
>> >> -i`/lib/fs/zfs/bootblk /dev/rdsk/c2t1d0s0
>> >> > * Permalink
>> >> >
>> >> > Powered by a free Atlassian Confluence Community License granted to
>> >> OpenIndiana. Evaluate Confluence today .
>> >> > * Powered by Atlassian Confluence 4.1.7 , the Enterprise Wiki
>> >> > * Printed by Atlassian Confluence 4.1.7, the Enterprise Wiki.
>> >> > * · Report a bug
>> >> > * · Atlassian News
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >>Вторник, 20 сентября 2016, 10:25 UTC от "Hans J. Albertsson" <
>> >> hans.j.albertsson at gmail.com>:
>> >> >>
>> >> >>Was going to refer to an old document on migrating the root pool, but
>> I
>> >> >>get 503 Service unavailable from anywhere on wiki.openindiana.org.
>> >> >>
>> >> >>Is anyone looking after this site? Will it reappear??
>> >> >>Is Gary Mills' short piece on migrating the root pool available
>> >> elsewhere??
>> >> >>
>> >> > _______________________________________________
>> >> > openindiana-discuss mailing list
>> >> > openindiana-discuss at openindiana.org
>> >> > https://openindiana.org/mailman/listinfo/openindiana-discuss
>> >>
>> >>
>> >>
>> >> --
>> >> ---
>> >> Praise the Caffeine embeddings
>> >>
>> >> _______________________________________________
>> >> openindiana-discuss mailing list
>> >> openindiana-discuss at openindiana.org
>> >> https://openindiana.org/mailman/listinfo/openindiana-discuss
>> >>
>> > _______________________________________________
>> > openindiana-discuss mailing list
>> > openindiana-discuss at openindiana.org
>> > https://openindiana.org/mailman/listinfo/openindiana-discuss
>>
>>
>>
>> --
>> ---
>> Praise the Caffeine embeddings
>>
>> _______________________________________________
>> openindiana-discuss mailing list
>> openindiana-discuss at openindiana.org
>> https://openindiana.org/mailman/listinfo/openindiana-discuss
>>
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> https://openindiana.org/mailman/listinfo/openindiana-discuss
--
---
Praise the Caffeine embeddings
More information about the openindiana-discuss
mailing list