[OpenIndiana-discuss] Duplicate devices in zpool, degraded

Grüninger, Andreas (LGL Extern) Andreas.Grueninger at lgl.bwl.de
Wed Nov 1 18:05:10 UTC 2017


Maybe the system did not detect that the fault is already cleared.
If you look in /var/adm/messages you will find the entries from fmadm with the ID.
If 
fmadm faulty
spits out messages concerning this device, you can clear the state with
fmadm acquit 
or
fmadm repaired.


-----Ursprüngliche Nachricht-----
Von: David Koski [mailto:david at kosmosisland.com] 
Gesendet: Mittwoch, 1. November 2017 15:49
An: openindiana-discuss at openindiana.org
Betreff: Re: [OpenIndiana-discuss] Duplicate devices in zpool, degraded

Thank you, Andreas.  I tried:

zpool clear syspool
zpool status -x

..but nothing changed.  I also scrubbed it without effect.

Regards,
David

On 11/01/2017 02:59 AM, Grüninger, Andreas (LGL Extern) wrote:
> Use
> zpool clear syspool
> zpool status -x
>
> Andreas
>
> -----Ursprüngliche Nachricht-----
> Von: David Koski [mailto:david at kosmosisland.com]
> Gesendet: Mittwoch, 1. November 2017 07:28
> An: openindiana-discuss at openindiana.org
> Betreff: [OpenIndiana-discuss] Duplicate devices in zpool, degraded
>
> The boot drive had uncorrectable errors but still not faulted.  I put the mirrored drive into the boot drive position (c2t1d0s0 into slot of
> c2t0d0s0) and put a new drive in place of the drive that was moved into the boot position, then booted the machine and resilvered.  However, the boot drive has a strange status where it appears twice in the zpool status, once faulted and once not:
>
> # zpool status -x
>     pool: syspool
>    state: DEGRADED
> status: One or more devices could not be used because the label is missing or
>           invalid.  Sufficient replicas exist for the pool to continue
>           functioning in a degraded state.
> action: Replace the device using 'zpool replace'.
>      see: http://www.sun.com/msg/ZFS-8000-4J
>    scan: scrub repaired 0 in 0h3m with 0 errors on Tue Oct 31 21:59:25 2017
> config:
>
>           NAME          STATE     READ WRITE CKSUM
>           syspool       DEGRADED     0     0     0
>             mirror-0    DEGRADED     0     0     0
>               c2t0d0s0  FAULTED      0     0     0  corrupted data
>               c2t0d0s0  ONLINE       0     0     0
>               c2t1d0s0  ONLINE       0     0     0
>
> errors: No known data errors
>
> Any ideas how to correct this and is it of concern?
>
> Regards,
> David Koski
>
>
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> https://openindiana.org/mailman/listinfo/openindiana-discuss
> _______________________________________________
> openindiana-discuss mailing list
> openindiana-discuss at openindiana.org
> https://openindiana.org/mailman/listinfo/openindiana-discuss


_______________________________________________
openindiana-discuss mailing list
openindiana-discuss at openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss


More information about the openindiana-discuss mailing list