[OpenIndiana-discuss] Connecting Serial Modem to Illumos (ACM9

[Till Wegmüller]

Hello Dear OI Community

I am trying to connect my Ultimaker to my OpenIndiana Server. It is a
serial device accessed through a python software.

When connecting the USB I can see it showing up in dmesg:
Apr 29 11:34:36 node02 usba: [ID 349649 kern.info] usba:        no
driver found for interface 1 (nodename: 'data') of Ultimaker BV
(www.ultimaker.com) Ultimaker 2.0
Apr 29 11:34:36 node02 usba: [ID 912658 kern.info] USB 1.10 interface
(usbif2341,10.config1.0) operating at full speed (USB 1.x) on USB 3.0
root hub: modem at 0, usbsacm1 at bus address 2
Apr 29 11:34:36 node02 usba: [ID 349649 kern.info] Ultimaker BV
(www.ultimaker.com) Ultimaker 2.0
Apr 29 11:34:36 node02 genunix: [ID 936769 kern.info] usbsacm1 is
/pci at 0,0/pci1043,84ca at 14/communications at 1/modem at 0
Apr 29 11:34:36 node02 genunix: [ID 408114 kern.info]
/pci at 0,0/pci1043,84ca at 14/communications at 1/modem at 0 (usbsacm1) online

But I do not know where that file would be under /dev. On linux it's
somewhere under /dev/ttyUSB or /dev/ttyACM.

I have a device under /dev/term that links to
../../devices/pci at 0,0/pci1043,84ca at 14/communications at 1/modem at 0:0 like
usbsacm1 should. But that device seems not to be correct.

Does anybody know where that device usbsacm1 would be under /dev? or do
I need anything aditional to get access to that device?

Thanks in advance for any advice and Greetings
Till