[OpenIndiana-discuss] Nvidia K2200 and 4K monitor?
bscuk2
bscuk2 at gmail.com
Fri Sep 25 11:30:41 UTC 2020
Hi,
I am running a Samsung 43 ultrawide on a EVGA GTX1060 on driver 396.24.
Works fine on the display port 120 refresh rate.
Robert
On 24/09/2020 11:32, Tony Brian Albers wrote:
> Hi guys,
>
> So, I've got the mentioned graphics card in my workstation.
>
> Does anyone know how to get it to work with a 4K monitor?
>
> I've tried using the nvidia-driver that is present in OI202004, 340.108
> and also the newest, 450.66.
>
> Using nvidia-settings, it's not possible to choose a higher resolution
> than 1920x1080.
>
> Looking at Xorg.0.log, the following seems odd:
>
> -----------------------snip----------------------
>
> [ 45.181] (II) NVIDIA(0): NVIDIA GPU Quadro K2200 (GM107GL-A) at
> PCI:1:0:0 (GPU-0)
> [ 45.181] (--) NVIDIA(0): Memory: 4194304 kBytes
> [ 45.181] (--) NVIDIA(0): VideoBIOS: 82.07.79.00.15
> [ 45.181] (II) NVIDIA(0): Detected PCI Express Link width: 16X
> [ 45.184] (--) NVIDIA(0): Valid display device(s) on Quadro K2200 at
> PCI:1:0:0
> [ 45.184] (--) NVIDIA(0): CRT-0
> [ 45.184] (--) NVIDIA(0): DFP-0
> [ 45.184] (--) NVIDIA(0): DFP-1
> [ 45.184] (--) NVIDIA(0): Philips FTV (DFP-2) (boot, connected)
> [ 45.184] (--) NVIDIA(0): DFP-3
> [ 45.184] (--) NVIDIA(0): DFP-4
> [ 45.184] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
> [ 45.184] (--) NVIDIA(0): DFP-0: Internal TMDS
> [ 45.184] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
> [ 45.184] (--) NVIDIA(0): DFP-1: Internal TMDS
>
> >
> >[ 45.184] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
> >
>
> [ 45.184] (--) NVIDIA(0): Philips FTV (DFP-2): Internal TMDS
> [ 45.184] (--) NVIDIA(GPU-0): Philips FTV (DFP-2): 165.0 MHz maximum
> pixel clock
> [ 45.184] (--) NVIDIA(0): DFP-3: Internal DisplayPort
> [ 45.184] (--) NVIDIA(GPU-0): DFP-3: 960.0 MHz maximum pixel clock
> [ 45.184] (--) NVIDIA(0): DFP-4: Internal DisplayPort
> [ 45.184] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
> [ 45.184] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the
> EDID for display
> [ 45.184] (**) NVIDIA(0): device Philips FTV (DFP-2) (Using EDID
> frequencies has
> [ 45.184] (**) NVIDIA(0): been enabled on all display devices.)
> [ 45.185] (WW) NVIDIA(GPU-0): The EDID for Philips FTV (DFP-2)
> contradicts itself: mode
> [ 45.185] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the
> EDID; however, the EDID's
> [ 45.185] (WW) NVIDIA(GPU-0): valid VertRefresh range
> (48.000-62.000 Hz) would exclude
> [ 45.185] (WW) NVIDIA(GPU-0): this mode's VertRefresh (24.0 Hz);
> ignoring VertRefresh
> [ 45.185] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
> [ 45.185] (WW) NVIDIA(GPU-0): The EDID for Philips FTV (DFP-2)
> contradicts itself: mode
> [ 45.185] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the
> EDID; however, the EDID's
> [ 45.185] (WW) NVIDIA(GPU-0): valid VertRefresh range
> (48.000-62.000 Hz) would exclude
> [ 45.185] (WW) NVIDIA(GPU-0): this mode's VertRefresh (30.0 Hz);
> ignoring VertRefresh
> [ 45.185] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
> [ 45.185] (WW) NVIDIA(GPU-0): The EDID for Philips FTV (DFP-2)
> contradicts itself: mode
> [ 45.185] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the
> EDID; however, the EDID's
> [ 45.185] (WW) NVIDIA(GPU-0): valid VertRefresh range
> (48.000-62.000 Hz) would exclude
> [ 45.185] (WW) NVIDIA(GPU-0): this mode's VertRefresh (25.0 Hz);
> ignoring VertRefresh
> [ 45.185] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
> [ 45.186] (WW) NVIDIA(GPU-0): The EDID for Philips FTV (DFP-2)
> contradicts itself: mode
> [ 45.186] (WW) NVIDIA(GPU-0): "1600x1200" is specified in the
> EDID; however, the EDID's
> [ 45.186] (WW) NVIDIA(GPU-0): valid HorizSync range
> (15.000-70.000 kHz) would exclude
> [ 45.186] (WW) NVIDIA(GPU-0): this mode's HorizSync (75.0 kHz);
> ignoring HorizSync check
> [ 45.186] (WW) NVIDIA(GPU-0): for mode "1600x1200".
> [ 45.186] (==) NVIDIA(0):
> [ 45.187] (==) NVIDIA(0): No modes were requested; the default mode
> "nvidia-auto-select"
> [ 45.187] (==) NVIDIA(0): will be used as the requested mode.
> [ 45.187] (==) NVIDIA(0):
> [ 45.187] (II) NVIDIA(0): Validated MetaModes:
> [ 45.187] (II) NVIDIA(0): "DFP-2:nvidia-auto-select"
> -----------------------snip----------------------
>
> See the 165MHz line? That's not correct, because if I do edid-decode on
> the edid from the monitor, I get:
>
> -----------------------snip----------------------
> Monitor name: Philips FTV
>
> >
> >Monitor ranges (GTF): 48-62Hz V, 15-70kHz H, max dotclock 600MHz
> >
>
> Has 1 extension blocks
> Checksum: 0x8b (valid)
>
> CTA extension block
> Extension version: 3
> 114 bytes of CTA data
> Video data block
> VIC 97 3840x2160 at 60Hz 16:9 HorFreq: 135000 Hz Clock: 594.000 MHz
> VIC 96 3840x2160 at 50Hz 16:9 HorFreq: 112500 Hz Clock: 594.000 MHz
> VIC 95 3840x2160 at 30Hz 16:9 HorFreq: 67500 Hz Clock: 297.000 MHz
> VIC 94 3840x2160 at 25Hz 16:9 HorFreq: 56250 Hz Clock: 297.000 MHz
> VIC 93 3840x2160 at 24Hz 16:9 HorFreq: 54000 Hz Clock: 297.000 MHz
> VIC 16 1920x1080 at 60Hz 16:9 HorFreq: 67500 Hz Clock: 148.500 MHz
> VIC 31 1920x1080 at 50Hz 16:9 HorFreq: 56250 Hz Clock: 148.500 MHz
> VIC 32 1920x1080 at 24Hz 16:9 HorFreq: 27000 Hz Clock: 74.250 MHz
> VIC 34 1920x1080 at 30Hz 16:9 HorFreq: 33750 Hz Clock: 74.250 MHz
> -----------------------snip----------------------
>
> So, EDID says that it can do max 600MHZ _and_ 3840x2160 at 60Hz...
>
> Has anyone else seen this?
>
> The hardware works as it's supposed to. If I run linux and use the
> nouveau driver, I can just set the resolution to 3840x2160 without issues.
>
> Any help/suggestions is much appreciated.
>
> /tony
>
More information about the openindiana-discuss
mailing list